1968 Chevelle With '87 GN engine

[TURBOPOWERED68]

Hey so how did you route the LC1 wires and where did you mount the controller? I have my controller on top of the heater box and the wires run through the factory antenna hole into the car.

The unit is on the body next to the trans bell housing.
i ran the wires up the fire wall and into a hole i drilled right above my heater box.

 

[TURBOPOWERED68]

Brand new Racetronix Stainless Steel fuel hanger is in with a Brand new XP pump.
Just need to add a new ground from the Battery to the sender and i should be done with the fuel system for now.

 

[TURBOPOWERED68]

60lb injectors are IN
New front sway bar is on its way.
Relocating the battery to the trunk
Relocating the ALKY tank to the trunk.

 

[TURBOPOWERED68]

Late last nigh/early this morning.

 

[ttypewhite]

Great build, congrats. Get rid of that breather on the valve cover. Looks like its making a mess, and you gotta be tired of smelling oil vapors come inside the car too. Get yourself a electric evac pump from a Lt1 and your set. Buy one from a scrap yard or ebay and Racetronix has a plug and play wiring harness to hook it up.

 

[TURBOPOWERED68]

Great build, congrats. Get rid of that breather on the valve cover. Looks like its making a mess, and you gotta be tired of smelling oil vapors come inside the car too. Get yourself a electric evac pump from a Lt1 and your set. Buy one from a scrap yard or ebay and Racetronix has a plug and play wiring harness to hook it up.

Yeah thats on my "to do" list but the list is long and I procrastinate about procrastinating

Posted from the TurboBuick.Com mobile app

 

[TURBOPOWERED68]

was going to order a front mount but with the new Twin turbo headers out i think i will wait for all the details first.
i will never be the fastest so i might as well go for the wow factor with some "Cool guy" parts.

 

[TURBOPOWERED68]

latest
1.65 Harland Sharp roller Rockers are in.
picked up 120# injectors can't wait to hit the track.
10ns here i come.

 

[TURBOPOWERED68]

front mount and pipes
Just need to install them

 

[TURBOPOWERED68]

This sucks

This was with 7/8 fuel tank, Spare tire, jack, subwoofer, half full Alky tank
And my Fat ass.

 

[qws2000]

Starting to add some real nice parts.... looks good.. good luck

 

[TURBOPOWERED68]

Starting to add some real nice parts.... looks good.. good luck

Thanks
I am going to need.

 

[cwmccray]

This sucks View attachment 217345

This was with 7/8 fuel tank, Spare tire, jack, subwoofer, half full Alky tank
And my Fat ass.

About the same weight as GN.....

 

[TURBOPOWERED68]

About the same weight as GN.....

me and the car need to go on a diet.

 

[cwmccray]

Same here

 

[Venus]

Did you use a GN gas tank? Pics?

 

[TURBOPOWERED68]

Did you use a GN gas tank? Pics?

Yes i used a GN gas tank.
I had to cut the neck and used a hose (from a boat fuel tank) to re-route the gas cap end in order to be able to center the gas tank on the car like the OE tank.

 

[Venus]

No matter what you did you couldn't get it to fit right so u wouldn't have to cut the filler neck?

 

[TURBOPOWERED68]

No matter what you did you couldn't get it to fit right so u wouldn't have to cut the filler neck?

Neck HAD to go in order to center the tank.
I considered to offset it for about 2 seconds. It would have looked TERRIBLE as the tank sticks out a good amount. But because its centered most people don't even notice it's size or that its not OE including a LOT of Chevelle guys.

 

[Venus]

Do you have a pic from the back of the car of it installed?

Thanks