You can type here any text you want

1st stock 109 block in the 8's DIck Kerney!!

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
very, very nice. congrats again. i knew it could be done. these little 109's are just getting more & more impresive.
 
This is fantastic! Great job to everyone involved. People like that is what it takes to keep pushing.
 
Wow

Now rub it in by saying it's on a stock crank, rods and steel caps. :D
 
So what are the spec's on that motor? The motor was at TSM spec's right? So it was stock block/crank/rods and no girdle? What about heads and intake?
 
So what are the spec's on that motor? The motor was at TSM spec's right? So it was stock block/crank/rods and no girdle? What about heads and intake?

, there are many things you cant do or must have but none of what you mentioned is restricted , the block has to be a production 109 (or old non stage) but thats it , it can be filled, girdled ,studded, have forged crank /rods/ pistons /mains , roller cammed , stroked ,destroked , bored as long as its less than 250CID


Engine
· Buick V6 production block casting (generally the 25526109 block, although, older non-Stage blocks allowed). Must be less than 250CID.
· Any valve covers and oil pan allowed.
· Buick V6 iron or aluminum cylinder heads.
· Aluminum cylinder heads allowed with 150 pound added weight penalty.
· No Stage 2 heads.
· No dry sump-oiling systems allowed.
· Factory stock intake manifold required. No external welding allowed except for EGR block-off plate and/or repairs. Porting allowed.
· No modifications such as welding, cold weld epoxy, puttying, etc. may be done on any portion of the intake manifold runners to increase manifold air flow are allowed.
· No aftermarket cast aluminum or sheet metal intake manifolds of any kind allowed.
· Any cast aluminum intake plenum allowed.
· Any size single modified stock or aftermarket throttle body allowed. Single throttle plate only.
· Any type stock location exhaust headers are allowed. Welded in EGT gauge probe bungs are allowed.
· Any single or dual exhaust system allowed. Must muffle and exit in stock location. 3.5" max size, including downpipe - measured 4.0" from the flange. Downpipe must be routed down through the stock location, no flex pipe allowed.


here's the big list ,lists more restraints on the stock appearing theme
Rules
 
Back
Top