3" SS down-pipe....fit with ole style ATR headers

[agteacher]

3" SS downpipe ( with 1.5" puck on wastegate arm) that will fit with a old set of ATR headers... NO external wastegate.

If I can not find the downpipe....then...I guess, I will sell my headers with crossover pipe...mild steel and I just had them 2000 degree GRAY coated by Jet Hot Coating (cost of coating $375).

MERRY CHRISTmas!!!!
Keep CHRIST in CHRISTmas!!!!


P.S.--Not in a "hurry" for a reply.......IT'S CHRISTmas!!!!!! HO....HO... HO.....

 

[Quick6'n'-K.C.]

Along time ago, i purchased a ATR downpipe thru a group purchase on this website when ATR was still open.

Guess what, ive still got it collecting dust and its brand new.

Yes its stainless steel, has the ss test pipe and internal wastegate with the 1.50 puck.

Now, what part number is the one you need? I have a ATR book, let me know and i will see if mine is the right one for the ATR headers.

I also have another that i am currently using, and a ATR external. (3) total.

BW

 

[8AV8]

I was able to "massage" the crossover on mine to work with a regular 3" THDP. I'll shoot you some pics if you want. They are off the car right now.

 

[agteacher]

Thanks

Along time ago, i purchased a ATR downpipe thru a group purchase on this website when ATR was still open.

Guess what, ive still got it collecting dust and its brand new.

Yes its stainless steel, has the ss test pipe and internal wastegate with the 1.50 puck.

Now, what part number is the one you need? I have a ATR book, let me know and i will see if mine is the right one for the ATR headers.

I also have another that i am currently using, and a ATR external. (3) total.

BW

HO...HO...HO...
The downpipe I have Now is a Applied Technologies---DP 300 series downpipe.... not sure of the part number...
I attached a picture....hope you can figure-out which one I have.
THANKS for the HELP....
I hope, I dont have to "massage" the headers...due to just getting them coated. The fit of the headers are GREAT on the motor, just my down-pipe hits the bandclamp(where the crossover connects to the header).....there is about 1 1/4 inch gap between downpipe and the turbo(where you bolt dp to turbo)...hope this makes sense.

Gota' go I hear ole' Santa and he is bring "PRESENTS" because i have been a VERY GOOD BOY!!!!!!:biggrin:

MERRY CHRISTmas!!!!!
Keep CHRIST in CHRISTmas!!!

 

[agteacher]

Great

I was able to "massage" the crossover on mine to work with a regular 3" THDP. I'll shoot you some pics if you want. They are off the car right now.

That would be Great......although I hope I can fix without any damage to the coating....

HO....HO....HO.....

Gota' go......Santa is "stuck" in the fireplace!!!!!! AND he can't get out to leave me my presents!!!!!!!

MERRY CHRISTmas to ALL!!!!!!

 

[Quick6'n'-K.C.]

It shows in my ATR catalog that the the DP303 internal pipe works with the ATR headers.
Are your headers actual ATR ones, or are they the aftermarket ones?

Im pretty darned sure the external pipe works with ATR headers because it sweeps out farther.

BW

 

[DCVING 6]

Im pretty darned sure the external pipe works with ATR headers because it sweeps out farther.

BW

Mine does.

 

[agteacher]

Now I wonder if these are ATR???? mild steel not SS

Thanks for all the HELP and the Info. on the headers and the DP.
I bought these on a parts car and was told they were ATR...... BUT now I do not belive they are AS the saying goes--LIFE is all about LEARNING...just HOPE it is not a EXPENSE lesson.
Here is what I know:
The headers are made of mild steel
The headers boltup to the block very easy--"no massage" needed to install.
The crossover "clear" all parts on the motor/starter/oil pan/trans. --" no massage" needed to bolt-up.
New Jet Hot "2000 degree-Gray" coating...cost $375.00
What ever these are... my downpipe will not fit about 1 1/2" gap between DP and exhaust housing on the turbo.