4.1 Stock block or Stage1 stroked rotating assembly

[ttypewhite]

I have a complete rotating assembly here for anybody that's building a 4.1that wants a 274 cubic inch motor. I bought this crank from Lance Ward 4 years ago and its in the same specs since I bought it off of him. Crank was also checked out by Mike Morran and given the thumbs up before I bought it. Drove this all last year with no issues. This is for off center motors. Check the kill section
- 3.625 stroke Buick Motorsports Steel Forged crank (wide journal) that is 2.4785 on the mains and 2.2185 journal size (20 under on the mains and 30 under on the rods)
- Carrillo 6.350 rods
- Forged Ross Pistons 4" dia with rings. Speed Pro file fit plasma rings. Compression height on piston is 1.225" Both used for just the summertime last year. No track duty on this set up, just street driving.

$2100 shipped for the entire setup. Will part out if all parts are spoken for.

As you can see the pistons were bought brand new and used for just last summer, rings are in mint condition as well.

 

[ttypewhite]

Turbonetic racegate forsale

Good condition, Supports 1000hp no issues. $225 shipped.

 

[ttypewhite]

RJC Girdle for 4.1 with crank scraper

$375 plus shipping with nessesary hardware

 

[ttypewhite]

ttt

 

[1chance]

Is the assembly balance? Will a stock flex plate, and balancer go on it?

 

[49-blues]

Will you take anything in trade for the girdle?

 

[ttypewhite]

Is the assembly balance? Will a stock flex plate, and balancer go on it?

Yes the rotating assembly was balanced. You can put the stock flex plate and balancer on the motor, but it would need to be balanced again cause I had a neutral balance SFI flywheel and BHJ balancer on trhe motor.

Will you take anything in trade for the girdle?

Sure, $375 cash:biggrin: I couldn't resist, sorry. Need cash for new project.

 

[1RIPPEN6]

Does nessesary hardware included oil pickup extension.

Thanks

 

[49-blues]

How much for just the crank?

 

[ttypewhite]

Does nessesary hardware included oil pickup extension.

Thanks

Yes Sir

How much for just the crank?

I would like to keep the rotating assembly together unless I had all parts spoken for, then I would separate.

 

[SCOOBY DOO]

Yes Sir



I would like to keep the rotating assembly together unless I had all parts spoken for, then I would separate.

C'mon Norbs...buy the rods and pistons. :biggrin:

 

[1RIPPEN6]

PM sent

Thanks

 

[ttypewhite]

Replied

 

[1RIPPEN6]

PM sent

Thanks

 

[ttypewhite]

Sale pending on the girdle

 

[ttypewhite]

girdle sold

 

[ttypewhite]

Rotating assembly is still forsale along with the the Racegate. Open to offers but not trades.

 

[ttypewhite]

pms were sent out, Friday the 13th bump.

 

[ttypewhite]

NEW PRICE $1750 SHIPPED

 

[8AV8]

racegate

still for sale?