4 AN supply line

[Bescurred]

My turbo saver supply line has started to leak. Called Precision to get a new one and tried a couple of hydraulic hose places around. I need one side that is 145-150 degree angle then about 2 1/2 feet of stainless size 4 line then a 45 degree angle. Do I have to go through summit of jegs and just make a new one? Or does anybody make said line ready to go?

 

[turbo nasty]

I made my replacement parts from Jegs

 

[20psiofevil]

I get all of my parts from race parts solutions.

 

[Slow91z]

If its just the fitting its not very hard to swap a new fitting in there.

 

[turbo nasty]

x2 dont be bashful with some type of lube on the fittings when assembling since the fray and or the alum can get chewed up.

 

[Bescurred]

I'm pretty sure its the hose it's self, but just to be safe i'm going to get all new fittings and a hose. I'm just afraid of effin' up my turbo lol.

 

[Slow91z]

Just flush the line before you install it and you'll be fine

 

[Chuck Leeper]

Is that original -4 rubber/w braid??

 

[Bescurred]

Not sure what you are asking. Its the original line from precision when I ordered the turbosaver. Its a stainless steel line with the rubber inside I believe.

 

[Chuck Leeper]

Not sure what you are asking. Its the original line from precision when I ordered the turbosaver. Its a stainless steel line with the rubber inside I believe.

Exactly what I was asking... The rubber liner can/will get brittle due to having hi temp oil pumped thru it, for who knows how long...

 

[turbo nasty]

When mine failed it started to seep through the hose outer jacket about midways from turbo to TS and dripping. I replaced the fittings with black ones and it looks much better than the Blue and red IMO.

 

[Bescurred]

Exactly what I was asking... The rubber liner can/will get brittle due to having hi temp oil pumped thru it, for who knows how long...

Gotcha, thanks I went ahead and ordered new parts.

When mine failed it started to seep through the hose outer jacket about midways from turbo to TS and dripping. I replaced the fittings with black ones and it looks much better than the Blue and red IMO.

That's exactly what mine is doing. I just ordered the blue and red since they are hidden anyways. Maybe next time I'll do that, does sound nice.

Thanks for the help fellas.