6765 billet turbo. hardly used!

[toomanymodz]

I've recently upgraded to a 6466 CEA ceramic ball bearing turbo, so I've decided to sell my 6765. It has about 650 street miles on it and 4 passes at the drag strip. Look at the photos and you'll see just how new it is. The exhaust side hasn't even rusted yet!

The turbo is a journal bearing, .63 A/R, with a HP actuator (18-30psi). The waste-gate hole has been ported to around 1.3 inches so that this turbo can run on pump gas at 15 - 20 psi. If you plan on cranking up the boost higher than 20psi, you'll need to replace the hot side (available from Precision) and port the WG hole smaller. Of course if you're running an external wastegate you don't need to change anything.

I have the receipt from Full Throttle. I paid $1,166.41. I'll sell it for $750 shipped to your door.

 

[toomanymodz]

I forgot to mention that it is an E cover. 3 inch inlet and 2 inch outlet.

 

[toomanymodz]

I need some new drag radials (too many 80 MPH burn outs). New price: $700 shipped to your door.

 

[imjoesnuffy]

Would an oversized puck from RJC fix this to run an internal gate? Just the kind of turbo I am looking for.

 

[toomanymodz]

Yes, that's the setup that I have.

 

[imjoesnuffy]

Air or water cooled?

 

[9SECV6]

Jb oil cooled

 

[toomanymodz]

Correct, oil cooled the same as the factory turbo.

 

[NyBlankets]

What is the power rating for this turbo from pte?

 

[toomanymodz]

If my memory serves me, I think Precision rated it around 860HP.

 

[Blazer406]

Conversation (a.k.a. PM) sent.

 

[toomanymodz]

SOLD!!

 

[Blazer406]

I got it..... arrived safe...... packed real good. It looks even better than described.

Thanks!

 

[TurboBob]

Congrats on the new blower..........

Bob

 

[Blazer406]

Congrats on the new blower..........

Bob

Thanks.

It will be a welcome addition to my combo.

 

[3.8L V-8 eater]

That's a nice turbo!! A buddy of mine is running that turbo in the tens with a stock bottom end motor and mild cam!!