700 rwhp @ 25 psi 76 GTQ 4 bolt 4.1 274 ci

at 22#s it ran 10.20 at 136.
The trans had a wicked 3rd gear flare and wide open throttle shifts
were at 5000 pretty much rode the convertor the whole time.
Trans is getting redone and a PTC convertor will be ordered
Then we will turn the boost up:D
 
at 22#s it ran 10.20 at 136.
The trans had a wicked 3rd gear flare and wide open throttle shifts
were at 5000 pretty much rode the convertor the whole time.
Trans is getting redone and a PTC convertor will be ordered
Then we will turn the boost up:D

Damn Otto your like a Wizard :biggrin:
 
at 22#s it ran 10.20 at 136.
The trans had a wicked 3rd gear flare and wide open throttle shifts
were at 5000 pretty much rode the convertor the whole time.
Trans is getting redone and a PTC convertor will be ordered
Then we will turn the boost up:D

What is the ultimate goal for the car?
It should be super fast with 76MM.
 
Your not kidding that thing was wicked and the owner is a hell of a nice guy too

Hey, thanks for the kind words. ;)

The car definitely ran strong and once a few things are worked out it should easily be in the 9's. Hope to see you at the track again!
 
Hey, thanks for the kind words. ;)

The car definitely ran strong and once a few things are worked out it should easily be in the 9's. Hope to see you at the track again!

Bison said we can take his PTC Convertor I have at the shop and I am working on a KC valve body now.
Get the trans out so we can get it set and see when hte next rental is:D
 
Bison said we can take his PTC Convertor I have at the shop and I am working on a KC valve body now.
Get the trans out so we can get it set and see when hte next rental is:D

The car will be at the shop tomorrow and hopefully apart. I placed a few calls for a KC valvebody as well. Find out when that next rental is. ;)
 
Otto wasnt kidding about the trans flare at WOT shifts!

Get that fixed, put the power down and start running some 9s! :D
 
production block with a 200 4R trans.
Trans is apart and 3 rd gear is bring dealt with.
I also got my hands on a KC valve body and a PTC convertor.

Now,will he drag it to Georgia?
 
production block with a 200 4R trans.
Trans is apart and 3 rd gear is bring dealt with.
I also got my hands on a KC valve body and a PTC convertor.

Now,will he drag it to Georgia?
any specs on the motor,ie...crank brand,rods,pistons etc...id like to duplicate a similar package.thanks.
 
Back
Top