You can type here any text you want

700r4 question

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

kustomwerker

New Member
Joined
Jan 6, 2007
Messages
28
does anyone know which yoke the 700r4 uses???is it the th400 yoke???i`m thinking of putting a 700r4 in a 454ss p/u that has the slip tailshaft 400...
 
There the small 27 spline output. Not the same as a 400.
 
I have already done this conversion on my truck. The 700 uses the smaller yoke like a 350 or 200. You will have to cut the front drive shaft. Can't remember how much, did this a few years ago. You will like the difference, at least I did :)
 
Most Ss454 Pickups Have A 400 With The Smaller 700 Type Yolk As Well As Wiring For The 700 ,just Need An Ecm Change For All To Work.
 
i did the swap to my 1 ton truck with the 400 but it had a strap type yolk with a split shaft...when i did it , i got the shaft and trans from a half ton long bed, so i didnt know about the small yolk in the other 400, but this info helps me alot...thanks everyone....and ps, the od makes for a much better driving experience!!!
 
Back
Top