Complete pull out from a 1986 T-Type. Engine, Transmission, and Harness.
Engine:
.030” over Sealed Power Pistons
Edelbrock 204/214 flat tappet cam
Double roller timing chain
New Gaskets
H&R Motor Mounts
Mini Starter
MSD 50lb injectors
Stock exhaust manifolds and crossover, no cracks
New Alternator from Advance with a lifetime warrenty
Garrett TE60 Turbo
Full Throttle Turbo Tweak Chip
Wiring Harness/Computer included
Transmission:
Rebuilt Brian Hofer Transmission 200R4
New 10.5” 2800 stall convertor
Trans/Convertor have approx 4000 miles on them
I purchased this engine/trans from a wrecked T-type from another board member on here. (See the link below) I’ve decided to take this project in a different direction. I tore the whole motor apart, cleaned and inspected everything, then reassembled the motor. While the engine was apart, I dropped one of the lifters and chipped it, so I installed a new one. This will require the engine to be ran at 2000 rpms for 30 mins upon initial startup.
http://www.turbobuick.com/forums/cars-sale/297833-wrecked-my-car-sale-pics.html
I prefer local pick up at this time. I am located in Mooresville, NC, about 20 miles north of Charlotte. Please feel free to call with any questions.
$2150/BO
Marc
704.507.7033
Engine:
.030” over Sealed Power Pistons
Edelbrock 204/214 flat tappet cam
Double roller timing chain
New Gaskets
H&R Motor Mounts
Mini Starter
MSD 50lb injectors
Stock exhaust manifolds and crossover, no cracks
New Alternator from Advance with a lifetime warrenty
Garrett TE60 Turbo
Full Throttle Turbo Tweak Chip
Wiring Harness/Computer included
Transmission:
Rebuilt Brian Hofer Transmission 200R4
New 10.5” 2800 stall convertor
Trans/Convertor have approx 4000 miles on them
I purchased this engine/trans from a wrecked T-type from another board member on here. (See the link below) I’ve decided to take this project in a different direction. I tore the whole motor apart, cleaned and inspected everything, then reassembled the motor. While the engine was apart, I dropped one of the lifters and chipped it, so I installed a new one. This will require the engine to be ran at 2000 rpms for 30 mins upon initial startup.
http://www.turbobuick.com/forums/cars-sale/297833-wrecked-my-car-sale-pics.html
I prefer local pick up at this time. I am located in Mooresville, NC, about 20 miles north of Charlotte. Please feel free to call with any questions.
$2150/BO
Marc
704.507.7033