86 gn 6500$ nj

[VMineo]

Car needs body work,runs and drives.Needs header panel,driver fender and driver filler.Driver door is rusted bad and will need a driver floor pan.Has a vacuum brake conversion.I brought all the parts needed to fix it.I have rust free door shells,abs fillers front and back bnib.Rust free trunk lid and a driver fender.The car has manual windows and locks.I brought the whole harness to convert it and I also brought a dash.The only thing i didn't get was a floor pan..The interior is a 9/10.Car needs a headliner..The motor runs good, the oil pan gasket is bad has a small leak.I will let car go with parts for 7500.Come see the car im in millstone township nj,5 min from six flags.Im going to try and add updated pictures of the car.Clean ma title

 

[VMineo]

pictures when i got car

I also forgot to mention in the add i have brand new headlight bezels and a rust free rad support.These are pictures of the car when i got it.Im going to try and take new pictures tomorrow.The only difference now is that it has a 87 gn grill on it

 

[VMineo]

More pics

..Heres pictures of the car once I brought it to my dads old shop back in june.I started to work on the car,then My father relocated his shop to nj .So I had to put the parts back on it so i could drive it to NJ.The reason why im selling it is because right now I do not have time for the car.It just sits in my driveway.Since my dad will not have his new shop running for atleast six months,I cannot work on it.I do not have a booth at this time to spray the parts.Any questions just pm me.Thanks \\

 

[2swoosh]

86 gn

Are u available to show this car on weekdays?

 

[VMineo]

Are u available to show this car on weekdays?

You can come so it whenever im always around

 

[VMineo]

I'm willing to trade my GN for a clean,rust free GN roller.

 

[2swoosh]

86 gn

Car needs body work,runs and drives.Needs header panel,driver fender and driver filler.Driver door is rusted bad and will need a driver floor pan.Has a vacuum brake conversion.I brought all the parts needed to fix it.I have rust free door shells,abs fillers front and back bnib.Rust free trunk lid and a driver fender.The car has manual windows and locks.I brought the whole harness to convert it and I also brought a dash.The only thing i didn't get was a floor pan..The interior is a 9/10.Car needs a headliner..The motor runs good, the oil pan gasket is bad has a small leak.I will let car go with parts for 7500.Come see the car im in millstone township nj,5 min from six flags.Im going to try and add updated pictures of the car.Clean ma title

Hey Doctor Paulie, can u check this car out? a few miles from your house:biggrin:

 

[VMineo]

new pictures of car

I got my camera working today and took new pictures of the car.I also took pictures of the rusted areas

 

[VMineo]

more pics

more pics as you can see the driver floor rusted from the inside out.I was told the window was left open for awhile.The interior was all changed.

 

[VMineo]

picture of parts

Here are pictures of the parts i have.ABS FILLERS NEW FROM GBODY,headlight bezels,doors,rad support,fender with inner fender also.The header panel was from a 86 t-type.I filled the hole with fiberglass and acrylic.It is perfect.

 

[VMineo]

more

The front bumper did not get messed up in the accident,its in good condition.The motor runs good ,tranny is good.If anyone has questions pm me.Thanks

 

[VMineo]

ttt

 

[3xbrowncutty]

intrested in a trade?

 

[VMineo]

Sorry not intrested

intrested in a trade?

 

[VMineo]

car is not for sale anymore and being chopped

 

[gn1090ss]

intrested in tail lights pm sent

how much shipping to zip. 51503

 

[3xbrowncutty]

thats a shame... i woulda saved it :wink:

 

[VMineo]

.

thats a shame... i woulda saved it :wink:

Well the motors not going to waste its going in my corvette