You can type here any text you want

A/C Fan not working in High position

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

87GNTurboTTop

Member
Joined
May 17, 2002
Messages
66
Hello everyone. The fan works in the lower 3 positions, but not on the high setting. I was reading in another thread a relay is usually the culprit. Is this easy to test? Can I switch the relays out and check that way? Thanks in advance.
 
Check the Purple wire coming off the connector on the blower motor, its the main power to the blower; trace it down the corner of the passenger side cowl area by blower, down the door post area
wire/conn. gets corroded.
wiggle it around & fan see if fan comes on.
lots of posts on fix
(No relays to check)
Do_O
 
Last edited:
The contact inside the relay hanging off the airbox is probably corroded. If you feel comfortable taking it apart (it's just a metal cap), slide some 180 grit sandpaper or a nail file between the contacts and clean them like you would clean a set of points. Then reassemble and enjoy high speed. I have done it several times success.
 
Thank you so much for the replies everyone. I will be sure to post once I get a chance to take a look and hopefully get it working. It has been super hot this week.
 
I was troubleshooting the same problem on my GN. Looks like I found the problem and I need to do some rewiring.
 

Attachments

  • 1439656065721.jpg
    1439656065721.jpg
    42.8 KB · Views: 88
Back
Top