I recently finished installing a new timing chain on my 87. I also ordered a new cam sensor cap from Casper. I followed the directions on setting it. The car does start up, but when I took it for a ride, as soon as I gave it quarter to half throttle it started to hessitate and skip bad with a good amount of black smoke out the exhaust. This leads me to think that the timing is off because of the very rich condition here. My question is how do i make sure the cam sensor is set correctly. I know its not 180* off because I marked it at tdc before disasembling the timing set.
That red light on the cap says on with a few degrees of adjustment. I just need to know how to set it exactly.
That red light on the cap says on with a few degrees of adjustment. I just need to know how to set it exactly.