You can type here any text you want

ATR Musuem Piece question.

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Windedv6

Member
Joined
May 13, 2003
Messages
31
Does anyone have or remember the ATR A/F gauge and knock sensor alert box shown below?

P1010001.JPG



I am looking for the four wire wiring instructions for it.

Thank you in advance for helping!

John
 
Does anyone have or remember the ATR A/F gauge and knock sensor alert box shown below?

P1010001.JPG



I am looking for the four wire wiring instructions for it.

Thank you in advance for helping!

John

John
I have the diagram for the ECM-10. That is the one with the Timing Control.
Not sure if this could help..
 
That is the atr emc-10, I think I have the chip for it. It adjusts timing through the air temp sensor wires. There are much better devices out there than this now. Get a scanmaster and/or powerlogger and you will be light years ahead of this unit.
 
Funny- I still use that in my car. I bought it way back when and the A/F meter and knock sensor still work well. I don't adjust the timing with the chip anymore and use a TT chip.
 
The knock detector is still a good thing, but the led meter is just a voltmeter displaying the volts on your stock o2 sensor. Stock o2 sensors are only semi accurate for tuning.
 
The knock detector is still a good thing, but the led meter is just a voltmeter displaying the volts on your stock o2 sensor. Stock o2 sensors are only semi accurate for tuning.

I don't personally use this anymore as I use FXi units in both of my Typhoons. I sold this to a friend that has a stock Typhoon and just wants it for the audible knock alarm. I don't believe this unit had the capiblities to adjust timing. There are four wires red, black, orange and grey. I was hoping that someone remembered what they were.

John
 
i have 2 ATR Musuem pieces:cool: if anyone is interested.
new in the box 2.5 Stainless Pitbulls:cool:
new set of ATR raw stainless look Headers w/external gate metal penis.:biggrin:
 
ATR A/F gauge

Funny I have this same gauge and was just looking at it days ago. It's for sale if anybody wants it.
 
Back
Top