Blowthrough build repeat.

[WarWagon]

How do.you like your cam ? I have one very similar in my 4.1

I like that is cam is similar to stock and easy on valvetrain parts and better for iron heads that don't flow well and keeps rpm down.

 

[WarWagon]

Car is assembled again, it will get fired up tonight after some coolant is added and set the ignition timing.
Had to install 2 new motor mounts lol

 

[WarWagon]

Buick is alive again and no oil leaks yet yay!
There's a new fuel leak to address though, it's one of the injectors so I probably disturbed it or o ring failure. That's acceptable for the 2 years the car was down and mice taking up residence in the tail pipe

 

[WarWagon]

Fuel leak fixed itself! It's probably happy to be wet again after the 2 year dry spell.

New video · Tuesday, Nov 11 🎬

Tap to view!

photos.app.goo.gl

 

[liquidh8]

Sounds good!

 

[mikemcvaney]

I like that is cam is similar to stock and easy on valvetrain parts and better for iron heads that don't flow well and keeps rpm down.

Are your heads ported? I have ported with oversized valves on the 3.8 and champion irons on the 4.1 .

 

[WarWagon]

Are your heads ported? I have ported with oversized valves on the 3.8 and champion irons on the 4.1 .

I would call them cleaned up with a light port match.

 

[WarWagon]

Buick hasn't left this garage yet.
Testing the Alkycontrol system and found a leak on the updated filter and pressure switch assembly. Unfortunately came from Alkycontrol like that I didn't build it.
Easy fix though
Soon, Test it for leaks again after repair and lower the boost and finally go for a drive!