Boost Controler
- Thread starter 86gn
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
toofastforyou
2FAST4U
- Joined
- May 25, 2001
- Messages
- 5,785
boost controller reply...
Right now, I'm using a "bleeder" valve mounted on the passenger side valve cover which works fine, but I also have an in-car boost controller that is not connected right now and I would like to know how to hook it up so I can adjust the boost while making runs down the track?...
Any help would be appreciated! Thanks, 'bye, Claude. 
Right now, I'm using a "bleeder" valve mounted on the passenger side valve cover which works fine, but I also have an in-car boost controller that is not connected right now and I would like to know how to hook it up so I can adjust the boost while making runs down the track?...
Any help would be appreciated! Thanks, 'bye, Claude. I can't compare this to any other kind, but mine is Ramchargers and I like it. Set the wastegate at 22lbs and then leave it alone. Min. of 15 to a max. of 22. Now I have to set it to drop back to lower boost in 3rd and 4th gears. Now the question is where did I put the directions.
Mile Hi GN
Member
- Joined
- May 23, 2001
- Messages
- 184
Boost Commander here, no experience with any others.
I get about a 6 PSI swing, min to max, using one solenoid. You can set that 6 PSI range where you want it using the adjustable wastegate.
It's pretty consistent and I haven't had any problems.
I get about a 6 PSI swing, min to max, using one solenoid. You can set that 6 PSI range where you want it using the adjustable wastegate.
It's pretty consistent and I haven't had any problems.
Similar threads
