Cars going low10's - high 9's ?

[chasmat2316]

TR's going low 10's to high 9's what's your rear suspension setup? What shocks, springs, LCA brackets, & sway bar are you using? Thanx

 

[BobbyBuick]

i would go with HRs unit now but we built a wolfecraft style bar.Qa1s,spool 33 spline axles ,cclip eliminaters,southside lowers and umi adjustable uppers HR has tham also1.41 best 60 foot to date.OH cargo replacment springs by trw moog

 

[Nick Micale]

HR all the way!

Using the HR anti-roll bar, and their upper and lower rear control arm, I have done consistant 1.35 60's in 9 sec. trim.:smile:

This is with new stock GN coil springs and used KYB shocks. Frame has also been stiffened.

Does not leave like the pic below, that was before the HR treatment!

 

[Boost231]

got to love the HR bar.

 

[KevinB]

My best 60' so far was a 1.44. I know my suspension needs some major help, but this is what I got:

Stock front and rear springs (all 4 are well seasoned)
9" rearend (the upper control arm mounts are raised to change the instant center of gravity)
ATR sway bar
stock rear shocks
air bag in r/r
Metco upper and lowers in rear
pinion angle at -3
Front has Koni adjustables with the rebound adjusted as loose as it gets

These numbers are with a 10.5x28x15" m/t stiff sidewall on a sh*tty track.

Future plans are to add some better rear shocks and the hr anti roll bar. I want to ditch the ATR bar and air bag

HTH

 

[Grumpy]

stock UMI replacement upper and lower control arms... ATR sway bar .. Koni shocks ... street car

 

[d0n_3d]

This is the setup I'll have done when my car is finished (should be running high 9's):

REAR: HR adjustable uppers, HR lowers, ATR rear bar, stock coil springs with air bags, Gabriel Ultra shocks, 30-spline Moser axles, TA Performance rear end girdle, stock 8.5 assembly with Eaton posi unit, aluminum driveshaft with spicer ujoints

FRONT: TRZ Performance upper and lower tubular control arms, Comp Engineering 3-way adjustable shocks, stock replacement springs, 11" Baer brake setup, all new steering components

 

[chasmat2316]

ttt

 

[Underboost]

HR Bar

Stock replacement Moog springs.
Koni Adjustable shocks in all 4.
Air bags in rear at 2lbs.
HR rear Bar
HR Upper, and Lowers.
No front sway bar
28 spline moser axles
Auburn Posi Pro
Strange Gears.

 

[chasmat2316]

Thanx for all the input, are any of you guys using relocation brackets for upper or lower control arms? what are you setting pinion angle at?

 

[Underboost]

Thanx for all the input, are any of you guys using relocation brackets for upper or lower control arms? what are you setting pinion angle at?

3