Chicago Trading Post III

Got some junk ..
Accufab FPR- threads look iffy, but didnt leak and worked fine. $30
OML 10mm plug wires- $50
Stock IC with front shroud , and rear kenny bell shroud - $75
HKS wastegate- $40
Stock TB polished - $40
 

Attachments

  • 20170726_194921.jpg
    20170726_194921.jpg
    1.5 MB · Views: 118
  • 20170725_193903.jpg
    20170725_193903.jpg
    3.5 MB · Views: 125
  • 20170725_193832.jpg
    20170725_193832.jpg
    4.4 MB · Views: 132
  • 20170725_193722.jpg
    20170725_193722.jpg
    1.5 MB · Views: 120
  • 20170725_192639.jpg
    20170725_192639.jpg
    3.9 MB · Views: 108
  • 20170725_192631.jpg
    20170725_192631.jpg
    4.1 MB · Views: 131
  • 20170725_192136.jpg
    20170725_192136.jpg
    4.3 MB · Views: 118
  • 20170725_192141.jpg
    20170725_192141.jpg
    3.7 MB · Views: 119
  • 20170725_192122.jpg
    20170725_192122.jpg
    4.1 MB · Views: 117
Tire Sale
1 New Mickey Thompson rubber inner tube, part number 9555. Fits 28'' to 31'' Dia tires with 10.5 to 11.5 tread width. Valve clamps to wheel. 11.00-15 $35
Nitto NT 555r Extreme drag radial, size 275/40r20. Only has 4 passes on them. $200 pair
1 New Goodyear Assurance comfort touring, size 225/50r17. $40
1 New Primewell Valera touring , size 205/55r16. $40
BF Goodrich radial t/a, p205/70r14. perfect white letters. 7/32 tread. $30 1 tire.
Bridgestone Turanza el400. 225/50r17. V speed rated. $50 for 3 tires.
Michelin Energy Saver A/S p215/65r17. 9/32 tread. 3 tires for $100
Pirelli P6 four seasons. p235/45r17. 8/32 tread. 1 tire for $40
Goodyear Eagle Ultra Grip. 245/55vr18. 10/32 tread. 2 tires for $70
 
WTB: Stock Axle 87 GN.

I may need one stock Axle. Having the bearings replaced and the axle bearing race on one of them is pitted. Anyone have one near me (Villa Park, IL) that is in very good condition?
 
WTB: Stock Axle 87 GN.

I may need one stock Axle. Having the bearings replaced and the axle bearing race on one of them is pitted. Anyone have one near me (Villa Park, IL) that is in very good condition?
I have some stock axles. Free if you want to pick up in Lake in the Hills
 
TORQUE CONVERTER - Dusty Bradford's PTC 2800 10 inch Converter

LOCAL PICKUP ONLY - Villa Park, IL - $350 Firm.

Purchased and installed about 6 years ago. Approximately 5000 miles on it and about 50 1/4 mile passes. Only tried locking at WOT once at the track, knew it was slipping so I never locked again. This was an excellent converter on my stock long block with bolt-ons, but I had to upgrade to a 9.5 inch with my new build.

- Jim
 

Attachments

  • IMG_20180520_113814666.jpg
    IMG_20180520_113814666.jpg
    1.6 MB · Views: 91
  • IMG_20180520_113907414.jpg
    IMG_20180520_113907414.jpg
    2.3 MB · Views: 87
  • IMG_20180520_113830690.jpg
    IMG_20180520_113830690.jpg
    2.5 MB · Views: 91
Sold the car. Selling the original brake booster, 70K on it. Took it off to go hyrdroboost when it was acting up a bit. Tested with new ball and worked great. So all you need is a new ball. Still went hydroboost. Best offer. Thanks Located out south by Orland. 773-636-526
 

Attachments

  • 111.jpg
    111.jpg
    109 KB · Views: 121
  • 222 - Copy.jpg
    222 - Copy.jpg
    77.7 KB · Views: 108
  • 333.jpg
    333.jpg
    104.6 KB · Views: 108
Selling black rims that I ran 325's on for a few weeks. Looked great on car. Practically brand new. Got a bunch of spacers I'll throw in ranging from .5" to 1/4". Best offer. Thanks Located out south by Orland. 773-636-526
 

Attachments

  • eeeeeeeeeeee.jpg
    eeeeeeeeeeee.jpg
    386.9 KB · Views: 145
  • ddddddddddddd.jpg
    ddddddddddddd.jpg
    372.7 KB · Views: 158
  • ffff.jpg
    ffff.jpg
    539.7 KB · Views: 151
  • kkkk.jpg
    kkkk.jpg
    397 KB · Views: 110
  • rrr.jpg
    rrr.jpg
    445.5 KB · Views: 110
  • vvvv.jpg
    vvvv.jpg
    467.3 KB · Views: 102
TORQUE CONVERTER - Dusty Bradford's PTC 2800 10 inch Converter

LOCAL PICKUP ONLY - Villa Park, IL - $350 Firm.

Purchased and installed about 6 years ago. Approximately 5000 miles on it and about 50 1/4 mile passes. Only tried locking at WOT once at the track, knew it was slipping so I never locked again. This was an excellent converter on my stock long block with bolt-ons, but I had to upgrade to a 9.5 inch with my new build.

- Jim


Reduced to $300
 
The spindles bearings and slotted brake system. I am in Chicago. If I make the trip down south I might pick up a few more stuff. Let me know how much
 
TORQUE CONVERTER - Dusty Bradford's PTC 2800 10 inch Converter

LOCAL PICKUP ONLY - Villa Park, IL - $350 Firm.

Purchased and installed about 6 years ago. Approximately 5000 miles on it and about 50 1/4 mile passes. Only tried locking at WOT once at the track, knew it was slipping so I never locked again. This was an excellent converter on my stock long block with bolt-ons, but I had to upgrade to a 9.5 inch with my new build.

- Jim


Price reduced to $250



.
 
Top