You can type here any text you want

Emblem adhesive

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
That's convenient. I didn't see any for the hood and deck lid "3.8litersfi" emblem... Maybe one day...:)
 
Ran in to this site to put my intercooler emblem on (was taken off) and my red GN emblem. Pretty awesome, already precut. Page 3 has the intercooler tape.


CAR Motorsports: Premium 3M Double Sided Die Cut Emblem Tape

On a side note the carpets look really nice too.

Hey, guys, no need to spend twelve bucks on this tape...go to your local WalMart, look in the automotive section and you'll see the 3mm red tape, 1/2" wide tape, roll about 2" round, for about 4 bucks. Just put two or three strips on the back of your emblem, trim the sides with an X-acto knife, and you're home free. This is what I did. I bought about three rolls of the stuff and never run out of use for it, especially when I removed the emblems, took off the old tape, and put this on. Works great. I even put it on the back of the front bumper impact strip to put on the bumper. I trimme the tape to about 1/8" wide, stuck in on the impact strip back edge, and it goes on tight against the black bumper. No rattles or letting moister get behind it.

Bruce '87 Grand National
 
I just went out to my garage and checked this tape: it comes in a roll in this size: 1" wide by 60" long. The tape is red. At one WalMart it was $2.99 a roll, at another 30 miles away it was $4.39. But it is the 3mm tape, called super strong, outdoor tape. Works just like the original.

If you ever have to remove the emblem with Gorilla Glue, can you use the same method as with tape? I.e., heat gun, fishing line? My emblems were not lined up right when the GN was repainted, so this is the method I had to use to get them off without damaging the paint. Just wondering. Gorilla Glue, would it damage the paint if the emblem had to be removed?

Bruce '87 Grand National
 
Back
Top