Spooled231
Member
- Joined
- Jun 21, 2001
- Messages
- 331
I purchased this XFI the week of Bowling Green this year (date of manufacture 5/10/07 latest version 1.333)
Here are the details:
3 bar MAP not inlcuded as I already had one on the car and didnt purchase it.
XFI ECU (latest 1.333 version) all paperwork and boxes.
FAST XFI ECU software CD.
Internal Data Logging configured.
Wide Band o2 with extension harness
Comm cable from ECU to laptop
Serial to USB port adapter harness for Comm cable.
CD software for USB port configuration on laptop.
Caspers Electronics jumper harness(Buick to XFI interface direct plug and play)
Caspers Electronics 3ft XFI extension harness allows for under the seat mounting of XFI ECU.
I am being upfront and forward of why I am selling it.
The reason why I am selling it is due to the lack of support we recieved on the Caspers Electronics extension harness issues we were having. Verified we were having extension harness issues with a friend of mines XFI extension harness.
1. Laptop wouldnt connect to ECU (Comm cable was pinned incorrectly in extension harness plug and now repinned)
2. Wide band o2 wouldnt correct (2 wires were reversed in the extension harness and now fixed)
3. Ignition switched power wire in the extension harness was cut to verify a voltage correction % rate that FAST has internally built into the software. Operating as programmed.
Overall 3 wires were cut, soldered and heat shrinked and all issues have been resolved.
After talking to Cal at Hartline and Kip at Excessive, they both have had issues with the Casper's jumper harnesses with other and similar issues.
Brand new this setup with the 3ft extension harness is $1950 or $1899 for the standard extension harness. I am entertaining all reasonable offers. Lowball offers will not be accepted.
Please post or contact me if you have any questions.
John Martin
1986 Buick T-type
9.81 @ 137
johnboyv6@gmail.com
Here are the details:
3 bar MAP not inlcuded as I already had one on the car and didnt purchase it.
XFI ECU (latest 1.333 version) all paperwork and boxes.
FAST XFI ECU software CD.
Internal Data Logging configured.
Wide Band o2 with extension harness
Comm cable from ECU to laptop
Serial to USB port adapter harness for Comm cable.
CD software for USB port configuration on laptop.
Caspers Electronics jumper harness(Buick to XFI interface direct plug and play)
Caspers Electronics 3ft XFI extension harness allows for under the seat mounting of XFI ECU.
I am being upfront and forward of why I am selling it.
The reason why I am selling it is due to the lack of support we recieved on the Caspers Electronics extension harness issues we were having. Verified we were having extension harness issues with a friend of mines XFI extension harness.
1. Laptop wouldnt connect to ECU (Comm cable was pinned incorrectly in extension harness plug and now repinned)
2. Wide band o2 wouldnt correct (2 wires were reversed in the extension harness and now fixed)
3. Ignition switched power wire in the extension harness was cut to verify a voltage correction % rate that FAST has internally built into the software. Operating as programmed.
Overall 3 wires were cut, soldered and heat shrinked and all issues have been resolved.
After talking to Cal at Hartline and Kip at Excessive, they both have had issues with the Casper's jumper harnesses with other and similar issues.
Brand new this setup with the 3ft extension harness is $1950 or $1899 for the standard extension harness. I am entertaining all reasonable offers. Lowball offers will not be accepted.
Please post or contact me if you have any questions.
John Martin
1986 Buick T-type
9.81 @ 137
johnboyv6@gmail.com