New Fastest THS time in BG 2013....9.521 @ 140.15
Thats getting it done !!!!!!!!!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!New Fastest THS time in BG 2013....9.521 @ 140.15
New Fastest THS time in BG 2013....9.521 @ 140.15
Slowly everyone will start getting there. Just like TSM... Two 8 second cars and 4 others in the 9.20-9.30 range at BG. And we didn't even get to race on Sat to see the other cars turn it up.I wouldn't say it is a 9.5-6 class. There is one car left that can run those times (clay sold his and mine will never be a ths car again, don't know of any other ths car that has been 9.7's or faster.) which is Hayes. Everyone else is pretty much at the 10.0 or slower range as far as I know.
Nice pass btw!
My car is still racing with a new driver I am told
Awaiting shipper
Cars paid for but at my house
Can't find a shipper that will haul the front bumper, 4 extra wheels and two original seats the guy bought with it
Clay, is the guy going to run THS with the car? Where does it need to go? If location and money is right I might not mind taking it.
I remember saying this would end up being a 9.50-9.60 class..... And here we are.
Can you give a run down of the combo?I ran my personal best THS pass of a 9.525 @ 134.55 mph which eclipsed the old THS record pass ( 9.526 ) by .001 that Sean Hayes set in 2015. The pass would have been even quicker- if I did not have to lift @ the 1000 ft mark due to my ALKY map sensor failed which cause the O2 corrections to increase out of limit. We had a really wonderful weekend. Hopefully we will get a chance to do it again this fall at the 2021 Turbo Buick Nationals in NC.
Haulz A
The car weighs 3680 lbs with driver, engine combo; 250 cu inch stroker, custom camshaft grind, custom JE pistons, GN1 4340 forge crankshaft and Rods, Champion Aluminium cylinder heads custom CNC/Race/hand ported, 6766 BB 3X2 cover, 2004R tranny built by Watson transmission in Valdosta Ga, PTC custom TQ, Competition Engineering shocks on all four corners, HR parts_N_stuff upper/lower control arms and anti roll bar, Truetrac rearend/ 30 spline axles/ 3.42 ring gear. ECU; Fast 2.05 software- Cal Hartline dyno tuned.Can you give a run down of the combo?
Weight?
That’s impressive on a 3x2 turbo.