Fitting size????

[TR Custom Parts]

Anyone know what the fitting size is for the turbo oil feed line going to the brass block by the oil pressure sending unit???? I haven't run the stock brass block for a while now so don't have anything here to refer to.

I know it is an inverted flare but exactly what size is it???? Thanks.

 

[turbofabricator]

1/4" inverted flare. Uses a 7/16" wrench. If you need the actual thread pitch, Google "1/4" inverted flair"

Here did it for ya: http://www.pirate4x4.com/tech/billavista/PR-Hydro_Steering/Dash sizing.pdf

 

[TR Custom Parts]

Thanks, trying to find a brass plug to block it off. Wonder if you can just use a regular hex one with hollow core??

 

[Nick Micale]

A good parts store will have a plug for inverted flare.

 

[turbofabricator]

I agree, a 1/4" inverted flare plug is available from a good parts store. If you can't find one locally, here is a great source for plumbing fittings.

Discount Hydraulic Hose.com

 

[TR Custom Parts]

Thanks guys, want to include one of these with my new Turbo Protector setup so my customers don't have to hunt them down when they go to do the installation.