EightSecV6
MDBL
- Joined
- Jul 18, 2001
- Messages
- 2,514
I have 2 of these available. I have 2 BMS forged cranks with a 3.22 stroke and NEW Eagle 6.125 (Chevy) rods. Fresh grind and magged. They will take .010 under Chevy bearings on the rods and .010 under Buick bearings on the mains. If you have a stock block bored .030, you would get 223 cubic inches but it would be considerably stronger than stock parts. I can grind the rods for on center or off center if you wanted to use it in a stage block.