You can type here any text you want

Frame needed

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
I have at least one very good one or two? between $200 and $390 depending on condition located in Worcester Ma #774 696 3585 THANX KERRY
 
i have at least 5 frames here in connecticut.i'll let you have the any one you want $300 .i have a super nice 1 from a 65,000 mile car.there is not even any scale on it. kid pulled car apart to make a racecar he did not get past stripping car apart. i am sure you won't be disappointed

meriden connecticut 203 213 9126

tons more parts as well parting a gn and 5 regals and a 87 t type and some other g bodys

http://www.turbobuick.com/forums/parts-sale/279154-87-turbo-t-parting-out-connecticut.html

http://www.turbobuick.com/forums/parts-sale/277304-parting-out-gn.html

http://www.turbobuick.com/forums/parts-sale/271260-4-na-regals-getting-parted-out.html
 
i don't have exact pictures of the frame i am talking about but the cutlass that is a rosewood color is the 1 i am telling you about the frame from.currently the car is about 100% apart just need to unbolt the 10 bolts that hold body to the frame that is it . car is way apart,the only hole in this car was a small 1 behind 1 tire.this car even had really nice doors that is why i bought it.i sold 5 frames last year.i had people here from mass,new hampshire,new jersey and upstate new york and none were disappointed all went home happy.i have some pics of other frames that i sold but nothing i was telling you about.give me a call 203 213 9126

connecticut doesn't use salt on their roads i believe mass and other more northern states do.we just use sand and it helps the frames last longer.

i have had rotted frames but more tend to be good than not

http://i305.photobucket.com/albums/nn217/ttaowner/CUTLASS442/garage2gs062.jpg
 
i got 1 of the 2 frames out from under car last night looked really good. the
2nd frame could be pulled out from under car within a hour probably try to get that 1 out over the weekend,


you can pick up a frame and haul it home with a pickup truck with a ladder rack or use a car trailer or worse case scenario rent a truck from uhaul

203 213 9126
 
Still Looking ? I Have Frame #2 Coming Out Tomorrow Night So I Will Have 2 For Viewing.

Give Me A Update As I Would Like To Give A Fellow A Board Member
1st Shot Before They Are Advertsied Elsewhere.

203 213 9126
 
Frame

Guys.. Make Sure The Frame Is From A Turbo Car, The Trans Crossmember Mounts Differetly. A Non Turbo Car,you Will Need To Weld The Lt Side Bracket Onto The Frame To Hold The Center Crossmember.. The Rt Rear Exhaust Hanger Mounts Differenly(just Drille 2 Holes) Other Than That,the Frames Are The Same...
 
Guys.. Make Sure The Frame Is From A Turbo Car, The Trans Crossmember Mounts Differetly. A Non Turbo Car,you Will Need To Weld The Lt Side Bracket Onto The Frame To Hold The Center Crossmember.. The Rt Rear Exhaust Hanger Mounts Differenly(just Drille 2 Holes) Other Than That,the Frames Are The Same...

YES 1 OF THE 2 IS FROM A GRAND NATIONAL!

2ND FRAME IS FROM A CUTLASS AND THAT 1 WAS PULLED OUT TODAY AND ALSO READY TO GO !


I THINK IF ANY OF THESE G BODYS HAVE THE 200R4 IN IT THE WILL HAVE THE BRACKET YOU ARE TALKING ABOUT. EITHER WAY THAT IS A EASY FIX COMPARED TO ROTTED FRAME RAILS THAT ARE COMMON HERE IN THE NORTHEAST

203 213 9126
 
Back
Top