Front Lower A arms that fit for both stock shock and coil overs?

[greeneyegi]

I don't know if they are even made but I have 18way double adjustables with the two knobs
on the end and it is nearly impossible to adjust with stock arms.. I grind-ed a bit but not enough.
I am going with coil overs in future so am trying to order good ones now and not buy twice.
Any ideas welcome.

 

[1986 Buick GX1]

The QA1 lowers are made for coil-overs with adapter plates for use with coil springs.

Use with the adapter plates now and if you go with coil-overs in the future just remove the adapter plates.

 

[1986 Buick GX1]

Here you go.
They have a race version as well.

 

[greeneyegi]

Thanks guys I ordered a set.

 

[greeneyegi]

I hope the adjustment will be easier

 

[1986 Buick GX1]

The lower pocket seems raised, but hard to tell.

Do you have to reach the through the spring to adjust them?

 

[Turbo6inKY]

Speedtech's arms have the improved caster geometry and the spring cup is reinforced. You can use it with stock coil/shock or a threaded body coilover.

http://www.speedtechperformance.com...ct_id=176/category_id=96/mode=prod/prd176.htm

 

[1986 Buick GX1]

Speedtech's arms have the improved caster geometry and the spring cup is reinforced. You can use it with stock coil/shock or a threaded body coilover.

http://www.speedtechperformance.com...ct_id=176/category_id=96/mode=prod/prd176.htm

Thank you. I'm glad there are companies making universal A-arms for use with springs and coil-overs.
It looks like both brands offer 4 deg. more caster and more negative camber.

 

[greeneyegi]

Thanks guys I ordered a set.

Do you know the part number you ordered?
I have a set i need to replace the rubber boot on and cant find a part number anywhere
thanks