FS: 6157 Dual Ball Bearing Turbo.

[turbo_dreams_85]

6157B Dual Ball bearing Turbo up for grabs, only about 5k miles on it.
Spooled Super fast, little lag in it. No shaft play or anything at all. Love this turbo but time for a new turbo.
Its currently at UR50SLO's shop (good friends with him) so the pictures i have are a little dirty just an fyi, going to clean it before selling/ shipping.
Asking 800 O.B.O. worst i can say is No so shoot me an offer!
Located in South Bend Indiana.
Easiest way to get to me is here or email
Rporman1@gmail.com
time for Pictures!

 

[spooledyou]

What converter were you using how much hp or track mph

 

[turbo_dreams_85]

I was trapping 120 in the 1/4 spinning out of the hole.

Posted from the TurboBuick.Com mobile app

 

[turbo_dreams_85]

Bump!

Posted from the TurboBuick.Com mobile app

 

[ZNix]

Great turbo and seller. Someone pick this up, you won't regret it!

Posted from the TurboBuick.Com mobile app

 

[spooledyou]

The oil return looks like it is different from what I have

 

[turbo_dreams_85]

The oil return looks like it is different from what I have

I'll look into it. I believe its the stock feed line

Posted from the TurboBuick.Com mobile app

 

[turbo_dreams_85]

What converter were you using how much hp or track mph

And I was running a 3800 stall.

Posted from the TurboBuick.Com mobile app

 

[turbo_dreams_85]

Late bump.
Have more specs on it.
Standard oil feed line to fit it!
Water cooled turbo.
Intake side size 3 inches.
From IC size 2 inches.
Standard bolt up to manifold.
61mm compressor wheel.
57mm turbine wheel.
Still dual ball bearing.
A/R. 60
It is a 6157E-B

Posted from the TurboBuick.Com mobile app

 

[robzombie]

Why were you running such a high stall??

That turbo should spool like lightning with a 26/2800 stall.

 

[turbo_dreams_85]

Why were you running such a high stall??

That turbo should spool like lightning with a 26/2800 stall.

Owner before me had that stall placed in it. I plan on going smaller

Posted from the TurboBuick.Com mobile app

 

[robzombie]

What turbo are you going to replace it with??

You would probably like that turbo if you went with a 2,800 stall converter or even a little lower.

What are your goals for the car time and use wise??

 

[turbo_dreams_85]

What turbo are you going to replace it with??

You would probably like that turbo if you went with a 2,800 stall converter or even a little lower.

What are your goals for the car time and use wise??

Placing a 3200 stall in and a 70gtq hence the only reason I am selling it. I loved this turbo but bigger things are ahead and I am planning on making a street car that I can track as well. Been doing well on that but just want to upgrade really

Posted from the TurboBuick.Com mobile app

 

[robzombie]

Owner before me had that stall placed in it. I plan on going smaller

Isn't the 70gtq a bigger turbo than what you're selling??

You might want to keep the 3,800 with a 70gtq.

 

[turbo_dreams_85]

Isn't the 70gtq a bigger turbo than what you're selling??

You might want to keep the 3,800 with a 70gtq.

Yeah the 70gtq is bigger than what I am selling and I'll have to check in the stall for that.

Posted from the TurboBuick.Com mobile app

 

[turbo_dreams_85]

Bump!!

Posted from the TurboBuick.Com mobile app

 

[turbo_dreams_85]

SOLD SOLD SOLD! thanks for the support guys and happy boosting!

Posted from the TurboBuick.Com mobile app