FS: Lots of Parts

[GerrywithaG]

NOS (in GM box) Chrome headlight bezels, LH & RH: 350
Interior Door Handles LH & RH, nice condition: 40
Stock Cassette / Radio: 90
Gabriel Pro-Ryder Shocks USED: 30
A/C Delete Bracket / Pulley USED: 35
86-87 ECU, no chip: 125
Connecting Lower Front Frame Brace #6756 Kirban, almost new: 45
Stock turbo shield: 40
Crank IC Fan: 40
IC Shroud (very good condition, no cracks) x2: 100
Front air dam (very good, no cracks): 50
Rubber / Steel GM Original Fuel Lines at motor: 100
Stroud Safety Window Net, standard angle: 20
6x 72lb Injectors (flow-tested at 70lbs) Siemens, used: 280
5x (FIVE) 60lb Injectors (5 flow-tested at 60, 1 low/bad) Delphi, used: 200
Griffin Radiator, no coolers; 300
ATR 3" SS downpipe; 200

Iron Ported o-ring heads, Harland Sharp rockers (Fresh headwork done... valves, seals, beehive springs, locks, retainers, cut valve guides. Heads use Felpro Loc-Wire #1007 gaskets (not included).; 1,200 heads and rockers.

Champion GN1 "R" full ported heads. Zero miles after fresh work done by Champion; competition valve job, seals, shims, pressure tested, cleaned. Couple track passes at most. Never saw over 14 psi.; 2,100

 

[turbonut85]

Has the dual pillar pod been opened up for a larger gauge or am I just seeing things?? Put me in line pending answer....thanks.

 

[GerrywithaG]

You are correct.. it looks like it was "massaged" a little larger, however it measures 2 1/16"

 

[bison]

I'll take the inlet bell and the AC delete aluminum pulley

 

[jay dcpt]

I will take the interior door handles. Is 40 bucks for the pair or each? I really jusst need the driver side. Will you take a money order?

 

[gmmaft]

is that 25 shipped or plus shipping for the msd wires?
I might be interested

 

[gmmaft]

payment sent on MSD wires

 

[GerrywithaG]

PM'd all responses

 

[whitecobra98]

Gerry, I would like the connecting brace. I'll swing by to pick it up

 

[GerrywithaG]

Who are you?

 

[GerrywithaG]

 

[GerrywithaG]

Sold one front connecting brace, still have one left...

 

[GerrywithaG]

Added a few more items

 

[Dunebilly]

If you still have the stock turbo i need to replace mine its leaking . Thanks

 

[GerrywithaG]

added more

 

[LJLawrence]

Is the VDO boost gauge the cockpit series one like Kirban offers? Looks like everything is there thats needed for install correct? Do you accept PayPal? What about shipping to PA zip 19320?

 

[pedro]

Hey man can you do 225 on the ecu chip and injectors thanks

 

[9cobra9]

PM sent

 

[TurboTom72]

How much for the dash plate with the 3 gauge holes in it?

 

[GerrywithaG]

How much for the dash plate with the 3 gauge holes in it?

Already sold.