GBody parts dual fan?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

larry33kc

Well-Known Member
Joined
Aug 19, 2001
Messages
1,714
My car came with GBody parts dual fans, and their add says it's a HI/LO setup. My question is I don't think mine are working at hi speed. Is there a way to test them, and does the HI/LOW switch that Casper sell work with this setup?
Is there a way to control them like I was able to do with the old KB switches I used to have?
 
I just tied green to green/yellow wires on high and low speed relays on drivers fender and run both fans like on high all the time. Works much better IMO.
 
You ground the GY wire out right? I tried it when I was fiddling with it the other day it didn't seem to do anything. I will try it again if that's right.
 
I know that's how you do I on the stock setup didn't know it would work with these.
 
Are they using the Casper relays and harness? Just double checking. Thanks for the help. It would be nice to get control of the fans.
 
I did that last month with my alradco fans and it keeps it cold but the headlights dim everytime which I hate. Can't we have the chip programed to turn on fan two at 170 or something staggered?
 
This is what makes me think something's up with mine. My fans are both on. I don't know I have seen just a single fan on. Plus when they are running they don't seem like there is much output.
 
If they both run and your car stays cool driving around town, I wouldn't worry about it.
 
Back
Top