GN1 Valve Covers, 55lb & 42.5lb Injectors, Stock Heads Rods Pistons, Turbolink, Weldon, MSD, ECM

[GNVYUS 1]

Selling off a family members low mileage 1987 GN parts, stuff is about as unadulterated as you're going to get.

PRICES BELOW ARE WITHOUT SHIPPING

Weldon D2025-a with 12an Filter and Fittings with a 12an to 12an new in the bag still = $600 (SOLD)
Pump has 10 MINUTES on it as my cousin HATED how loud it was, this is probably too much flow for 99% of the board members. Parts new cost are $740 for pump, $100 for the filter, $19 for the new -12 to -12 in bag, attached are the feeds -6 to -12, filters -12 to -8 and the pumps outlet -8 to -6 fittings. It has the paper work from Weldon and a custom made and welded bracket, easy $900 into this.

MSD 8981 Timing Computer with MSD Crank Trigger = $100 (SOLD)
New 8981 is $220 and Crank Trigger I couldn't find, the sensor alone was $100 so what's the bracket?
Comes with MSD instructions.

GN1 Valve Covers with Moroso Chrome Breathers and Bolts = $100 (SOLD)
Slight scratch from the heater box on end of cover but in great shape, new at $140 and breathers at $38.

Siemens 57lb (#55) Injectors High Z with Turbo Tweak Chip = $180 (SOLD)
Injectors have super low miles on them and the TT chip is for Race Gas and 26/25 degrees of timing. Injectors new were $300 and chip $85.

Delphi / Lucas 42.5lb High Z Injectors = $100 (SOLD)
Injectors have super low miles on them and new were $210 for the set.

Stock Heads from low mileage 87 GN = $100 (SOLD)

Stock Rods and Pistons from low mileage 87 GN = $60

Turbolink with Turbolink Case and Cables = $75

I have Paypal and can take more pics if needed
View attachment 159981View attachment 159982View attachment 159983View attachment 159984View attachment 159985

View attachment 159987

 

[SHADOWII]

I'll take the pump for $600.00. How do you want payment?

 

[dpasadena]

Selling off a family members low mileage 1987 GN parts, stuff is about as unadulterated as you're going to get.

Weldon D2025-a with 12an Filter and Fittings with a 12an to 12an new in the bag still = $600
Pump has less than 1k miles on it and is probably too much flow for 99% of the board members. Parts new cost are $740 for pump, $100 for the filter, $19 for the new -12 to -12 in bag, attached are the feeds -6 to -12, filters -12 to -8 and the pumps outlet -8 to -6 fittings. It has the paper work from Weldon and a custom made and welded bracket, easy $900 into this.

MSD 8981 Timing Computer with MSD Crank Trigger = $110
New 8981 is $220 and Crank Trigger I couldn't find, the sensor alone was $100 so what's the bracket?
Comes with MSD instructions.

GN1 Valve Covers with Moroso Chrome Breathers and Bolts = $100
Slight scratch from the heater box on end of cover but in great shape, new at $140 and breathers at $38.

Siemens 57lb (#55) Injectors with Turbo Tweak Chip = $190
Injectors have super low miles on them and the TT chip is for Race Gas and 26/25 degrees of timing. Injectors new were $300 and chip $85.

Delphi / Lucas 42.5lb Injectors = $100
Injectors have super low miles on them and new were $210 for the set.

Stock Heads from low mileage 87 GN = $175

Stock Rods and Pistons from low mileage 87 GN = $100

Stock ECM from same 87 GN = $75

Turbolink with Turbolink Case and Cables = $100

I have Paypal and can take more pics if needed
View attachment 159981View attachment 159982View attachment 159983View attachment 159984View attachment 159985View attachment 159986View attachment 159987View attachment 159988

I'll take the valve covers. Please pm your paypal. Thanks

 

[N/A Notch]

PM sent on Siemens 55's & TT chip

 

[9SECV6]

Second on the v/c's and interested in the ecm has it been modified at all.

 

[GNVYUS 1]

Had to update a few things I left off last night like, I forgot to say shipping was not included in the price.

Also updated the Injectors and ECM is unmodified.

And I talked to my cousin again and I had the fuel pumps life span wrong, the 044 I have sitting here that I'm saving for myself had 1000 miles on it, this Weldon had 10 minutes on it, he hated how loud it was and how it looked on his GN. I'm honoring the price to the current member who emailed but if that falls through the price will go up to $650.

 

[turbov6man]

Interested in the 42.5s

 

[GetOwnedVette]

Bump for a good deal on that pump....wish I didnt already have one.

 

[9SECV6]

Did the first person take the valve covers if not let me know ?? let me know payment information and shipping to 33317

 

[GNVYUS 1]

Valve Covers are pending payment, member said he was Paypaling today so I'll hold them until tomorrow and if it doesn't come through I'll contact you.

 

[GNVYUS 1]

Valve Covers and Weldon Pump = SOLD

 

[GNVYUS 1]

Delphi/Lucas 42.5lb Injectors = SOLD

 

[GNVYUS 1]

Lowered Stock Heads, Pistons/Rods and Turbolink prices.

 

[GNVYUS 1]

Updated prices in original post.

 

[GNVYUS 1]

Sold MSD and updated 57lb injector price

 

[GNVYUS 1]

57lb Injectors & Chip = SOLD

Lowered Heads and Rod/Piston prices

 

[GNVYUS 1]

Stock Heads = SOLD

Lowered the Stock Rods and Pistons price