Good performance shifter

[TOOMANYTOYS]

I am looking into getting a good performance shifter for my 87GN. What do you guys recommend? My stock shiftter isnt very smooth and its hard getting a good run with it.

 

[gregmock84gn]

shifter

Would also like to know what is recommended

 

[jasjamz]

Stock trans, Quarter Stick.
THE ORIGINALL QUARTER STICK®

TH 400/350, Cheetah SCS
shifter1

 

[gregmock84gn]

shifter

will the console shifter for the 80s camaro fit???????????????????????
B&M 80692 Camaro Firebird 1982-92 Console Mega Shifter

 

[Turbo1]

The best racing shifter on the market is the Cheetah SCS by Turbo Action.

 

[toofastforyou]

B&M here...

Claude.

 

[Turbo6Smackdown]

The best shifter? Put it in drive, and flatten the pedal. Works every single time. No chances for failures.

 

[johnplogii]

The stock shifter can be made to work great in my opinion. I have modified the gate in mine to stop in 2nd & 3rd.

 

[Turbo6Smackdown]

Shift points should be set in the trans. More consistant.

 

[JayC]

B&M here...

Claude.

Thats awesome!

You can make a B&M Megashifter fit and look fairly factory.. other than the shifter actually not looking stock. We did one in a member's car here.. Ill see if I can get him to post a picture.

 

[turbodave231]

B&M Quicksilver will fit and look good.

 

[kingots2004]

i second the quick silver.

 

[turboeric]

Best Shifter

Hurst Quarter Stick for the 200 is not made anymore. If you are lucky, you can find one on e-bay.

 

[toofastforyou]

Thats awesome!

You can make a B&M Megashifter fit and look fairly factory.. other than the shifter actually not looking stock. We did one in a member's car here.. Ill see if I can get him to post a picture.

Thanks Jay for the nice comment!...:wink:...However, I must give credit to Brian Cotton who installed in into the console for me...:redface:

Claude. :smile:

 

["Turbo-T"]

Did you have to do any mods to make the quick silver fit and work? Also is the quick silver a ratchet shifter or a gate shifter?

 

[kingots2004]

Did you have to do any mods to make the quick silver fit and work? Also is the quick silver a ratchet shifter or a gate shifter?

its a rachet shifter and i had to cut off the factory shfter mount under the console and cut out some plastic under the cover then so looking and test fitting to get the throw right so it didnt hit front to back.its easy just take your time and measure a bunch i got it on the first holes i drilled.