Guess my time

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

BoostedTtype

Member
Joined
Feb 18, 2008
Messages
501
Ok guys planning on going to the track this weekend.. I was wondering if anyone could take the time to give me a estimated ET and 60 ft....

Mods are

Razors alky, TTchip, Accufab AFPR, Autolite 23s, Kirban wires, test pipe, Rtronx 32lb, Rtronx hotwire, Walbro 340, FT maf pipe, 9"K&N, 160 Tstat

Boost is set at around 19.. In first gear it'll climb to about 21 and !9 through 2,3,4..

turbo, Downpipe, and exhaust are stock:frown:

Also will be runnin 275/60/15 mickey D/R's...

Any guesses.....
 
with alky your only running 19lbs???

Yes... My mechanic suggested it because of the restrictive exhaust... I plan on buying a three inch exhaust system soon.. After thats installed I'll turn the boost up to say 22-23lbs
 
You need a downpipe more than a 3" exhaust. The is not your restriction at the moment.
 
13.1-13.4@100-102 mph

Depending on outside temperatures, don't expect a great 60ft or time through the stock exhaust system.
 
With today's technology you should have no problem running mid 12s. Back in 1990 I ran a 12.84 with nothing more than an old school Hypertech chip, an exhaust dump, K&N filter and M&H Racematsers with 110 race gas at 19 psi. Today's chips and tires are far superior and worth several tenths over my old combo. The key is getting a good launch. Try to leave at 4-5 psi if your brakes will hold. Lastly, don't be afraid to turn the boost up.
 
Yeah guys Im hoping for high 12's with this setup... As many have stated I too expect a 13 sec pass due to exhaust/downpipe limitations... 12.99 would be nice though...

Does anyone make a direct bolt on downpipe?
 
Yeah guys Im hoping for high 12's with this setup... As many have stated I too expect a 13 sec pass due to exhaust/downpipe limitations... 12.99 would be nice though...

Does anyone make a direct bolt on downpipe?

Many sponsers here sell downpipes.
 
Back
Top