By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!We are working on them also & should have complete units for $350 in about 60 days.
We are working on them also & should have complete units for $350 in about 60 days.
Awesome, now just have to get you guys to do headers and up pipe and we'll be able to keep doing mods to our cars as well. Like I said we seen these at Osceola and was very impressed with the items. Nice work, thanks for your support of the hot air cars.We are working on them also & should have complete units for $350 in about 60 days.
Awesome, now just have to get you guys to do headers and up pipe and we'll be able to keep doing mods to our cars as well. Like I said we seen these at Osceola and was very impressed with the items. Nice work, thanks for your support of the hot air cars.
Jamie
I've already sent someone your way concerning the 3 inch down pipe. Esp used to make a couple of things but lately their service kind of bites. Do you have a catalog available. I would love to have one so I can give more of my hot air brothers info. If not I will keep giving them your web site. Thanks again for the support, it's nice to know someone realizes we have a hobby to support as well. What are the intercooler systems for thoughYOU don't need an intercooler to be fast!:tongue:
I would love to see more HA headers on the market. I've been scared to buy postons after all the bad reviews I've gotten. If you put out headers, I'd be down for a set, and a new crossover!
Brian, Is the intercooler kit going to come with a intercooler? Will there be a option to buy only the adapters, hardware, and tubing,.. and not the intercooler, if so desired? What I'm getting at is: The spearco kits just had the front mount that came with it, correct? If we wanted to opt to use a 86/7 factory location intercooler, we wouldn't have to buy the front mount.
Also, Is it true that with the spearco kit you couldn't use your cruise control because the tubing blocked the linkage? If so, can that be corrected?