Help!! Sm 2.1

[87Turbolimited]

Would i be okay with my TPS .44 and my IAC 06 thats what i could get at tonite i wanted it at 25 but i got a little stresst out!!

 

[Adrian87]

wat

 

[TurboBob]

Would i be okay with my TPS .44 and my IAC 06 thats what i could get at tonite i wanted it at 25 but i got a little stresst out!!

yes, that will be fine.

was the 06 on the IAC in drive or park?

How high does the TPS go with the pedal floored?

how does it run?

Bob

 

[jasjamz]

Floored with the key on engine off....just in case someone brings this up on a search LOL

 

[pacecarta]

back out the adjustment screw a little and if the throttle blade will close a little more the iac will go up , the little bit the tps drops backing the screw out wont matter as long as its in the .40s.
if its already backed out so far that the throttle blade wont go back then theres an air leak somewhere

 

[87Turbolimited]

yes, that will be fine.

was the 06 on the IAC in drive or park?

How high does the TPS go with the pedal floored?

how does it run?

Bob

Its was on part at 06 but i drove the car this morning for a spin and its at 00-06 in park...
I didnt ck how high was was tps when drivin...
car runs okay, i mean b4 my readings where TPS.48 and IAC 58

 

[87Turbolimited]

back out the adjustment screw a little and if the throttle blade will close a little more the iac will go up , the little bit the tps drops backing the screw out wont matter as long as its in the .40s.
if its already backed out so far that the throttle blade wont go back then theres an air leak somewhere

Hey pacecarta ill try it today in break or after work since i drove my car... so by backing the screw out my iac will go up? hopefully it does i was having a hard time to bring it down now im having a hard time to bring it up to 25 lol hopefully i get it done today with ur notes.

thxs.

 

[mikestertwo]

so by backing the screw out my iac will go up? thxs.

Yes, it will go up.

 

[blackgn1]

Don't forget to check the TPS at WOT throttle. Like jasjamz said....engine not running.:biggrin: Keep working with it. Sometime pulling the TPS forward all the way and then doing your settings helps.