You can type here any text you want

Help with Z06 card style maf and gen 2 setup

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Dunebilly

Member
Joined
May 22, 2012
Messages
161
Hi I have the gen 2 translator hooked up and running with a 3"lt1 maf my question is I have a 4"maf sensor/maf pipe all in one that I want to use but when I tried configuring it it would not start .I tried maf input 4" mega maf and output gm stock (I think this is correct )the sensor is a card style Delphi that plugs directly to my gen 2 harness with the 5 pins I just don't know where to go next ...any input would be a blessing thanks
my chip is a tt 5.7 chip and I have sm and pl 3.0
 
I would make sure the wires from your stock plug to the new plug/sensor are correct.... Start with the simple trouble shooting first.. Do any MAL codes show up?


Posted from the TurboBuick.Com mobile app
 
can you take a photo of the wiring from the stock harness until the MAF card
 
ok I've reset the gen 2 and tried again the settings for the 4 inch ma .... my gen 2 says its a 1.35 version my question is do I need to use a different version or is 1.35 up to date because the car will not start.. I have a tt chip in it for now and I chose gn stock maf out ...any help would be awesome
 
What did the wiring to the adapter harness look likeo_O i never saw the pics

aaron
 
1.35 is a current version number.

the 4" megamaf is what you want to choose for MAF In

what are you seeing on Freq in and Freq out?

Bob
 
Back
Top