m2mtrsports
New Member
- Joined
- Aug 3, 2015
Change to original PCM, sputtered for about 20-30 sec. then the same no start. Will hit a cylinder once in a while.
Check eng light on (computer responding)
Fuses ok, added another gallon of fresh fuel.
Could not easily get to the injection 3way connector so just used a "Noid" light, never flashed once. No signal to injectors.
Checked for crank reference signal at PCM (A/B connector, socket B-5). When cranking there was a constant 11.4v not the expected 1-7v varying signal.
Suspect circuit 430 short to power or bad crank sensor?
Check eng light on (computer responding)
Fuses ok, added another gallon of fresh fuel.
Could not easily get to the injection 3way connector so just used a "Noid" light, never flashed once. No signal to injectors.
Checked for crank reference signal at PCM (A/B connector, socket B-5). When cranking there was a constant 11.4v not the expected 1-7v varying signal.
Suspect circuit 430 short to power or bad crank sensor?