HVAC control panel rebuild kit?

[turboTime87]

Finally getting around to diagnosing the non working HVAC control in my 87 T. Took it apart last night and the only thing I saw thay seemed like the problem was the 9 hole selector had a tiny separation in it causing a leak. Looks like the white retainer clip is broken. Does anyone make a rebuild kit? I purchased a NOS heater only vakve on ebay just to steal the star and retainer from, but just trying to see if that doesn't work out.

 

[BEATAV8]

I came across this. It’s a decal that soaks up the slop I guess. Haven’t used it yet.

https://elcohaulicssanonymous.com/ELCO/?s=Hvac

 

[HyperV6]

I have took mine apart and cleaned the rubber diaphram. I then put a thin coat of Molykote light on the rubber diaphram and put it back together. Mine works fine now. Mine was leaking and I could hear a hiss. You can find new 9 port valves but the are around $80 - saw on Highway Stars. Be careful with the plastic piece that holds it together - it may be brittle and break.

Hope this helps, Craig