Injector FP required for goals

[Detomaso71]

I have a stock 87 GN with a 49 and that's it currently as far as mods


I have a new 249 CID stroker with ported irons and 212 cam and goals are street mainly with possible strip and want 11.50s on 93 no Alky for an 11 second street car

Will 60 lb injectors and a Hotwire get it done safely no Alky at 18 lbs and low timing? Or do I need the 340 G7 racetronix pump in addition to Hotwire?

Plan on running the Bison MFS 6266 stock appearing turbo once engine installed

 

[we4Mateo]

Not enough boost to get there without a perfect hook and that'll take away from "street car". Add alky or race gas or go e85 and get the boost closer to 25psi even with the 6266 and it'll be easy.

 

[Detomaso71]

E85 sounds cheaper except I hear all these sludge injector stories

If I had the double pumper racetronix ss for E85 would the larger injectors be the only other thing I would need?
84 lb and a TT chip for E85
?

 

[we4Mateo]

E85 sounds cheaper except I hear all these sludge injector stories

If I had the double pumper racetronix ss for E85 would the larger injectors be the only other thing I would need?
84 lb and a TT chip for E85
?

I'm not experienced with e85 but I understand 80s will take you pretty far. There is some debate as to if a double pumper is needed or not vs a solid 340 single pump with good voltage. Eric's e85 chips are supposed to be the bomb.