JE Piston, K1 Rod, Eagle Crank, Roller Cam, Setup, Etc

[GNDriven]

I have moved to a stage motor and selling my 109 forged rotating assembly.
All parts were acquired in 2008, and have very little street duty and a dozen track passes.
The parts are currently with Don Cruz. I will get pictures as soon as I can.

1. JE Pistons 0.035over with floating pins PN 131557
2. K1 stock length rod
3. 4340 Eagle/Cat crank 3.4” stroke
4. Full Throttles Roller XR3 Cam setup includes
a. 215/220 Roller Cam, Pushrods, lifters, springs, cam button, set up for aluminum heads.
5. RJC girdle

This rotating assembly was balanced by Dave Hartman Heartbeat Racing. However all parts will be examined by Don before being sold.

I would like to sell as a package for someone. Price = $2000 for everything listed above.

Don Cruz will build a 109 for anyone who wants to use this rotating assembly. He has blocks on hand or ok if you want to send him your block. He can get new springs or whatever you want. This will no doubt be a stout short block built by one of the best.

I also have a stock lower intake ported to match Champions full race port job on aluminum heads by Champion. - $300

 

[bison]

Pm me a price for the crank, pistons, and rods if you are willing to seperate and how many CC's/compression height the pistons are.

 

[boostingbuick]

If you are splitting up the parts, I would like a price on #4.

 

[quadzila]

intake

im interested in the intake, do you have a few pics .

 

[that national]

put me second in line for the cam kit if you do split it up.

 

[GNDriven]

I appreciate the interest thus far.

For those asking about particular pieces, I am going to give a chance for someone to buy the lot, and/or build a short block with this setup. However, if I split it up I will let you know in the order I was pmed. Thanks.

As for those asking what it will cost to build the short block by Don Cruz, I can not speak for him, please contact him. He does build motors on the side.

I am offering a good setup here for a good price, so please let me know if you are interested.

 

[quadzila]

intake

im still very interested in the intake, would you have any pictures? thank you

 

[GNDriven]

The only picture I have is an old right now. It was taken when I put the car together in 2009. Don has it right now. I am going to get him to send it back to me shortly, unless someone wants send him your heads and he build a long block for you. He has everything there to do valve jobs, etc.

If you haven't already pm your email and I will def send you what I have

 

[bison]

The only picture I have is an old right now. It was taken when I put the car together in 2009. Don has it right now. I am going to get him to send it back to me shortly, unless someone wants send him your heads and he build a long block for you. He has everything there to do valve jobs, etc.

If you haven't already pm your email and I will def send you what I have

So what is the piston dish and piston compression height?

 

[GNDriven]

Bison,

I am going to have to get Don to measure it, unless I can find the old paperwork on them. I did not order them, the machine shop did.

Let me see If I can find a build sheet or something that has some numbers on it.

 

[cml87type]

Gulf coast

Could you be more specific on location. PM if you'd prefer. I'm right outside of Jackson, MS. Thanks Clayton