You can type here any text you want

looking for a perfect cylinder to hold alky on firewall??

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

driven87

Member
Joined
Jan 24, 2010
Messages
185
gonna be moving my alky tank to firewall where heat/ac box used to be for custom turbo setup going near where a stock coolant tank would be. i need to find something i can mount to firewall that would work and look decent and be able to hold alky. i will also need to order up a longer feed line from Razor soon too. any ideas on waht i can use as a tank in this spot? thanks
 
did you take the AC out ?? if so a flat gallon container would be an easy fit.
 
This is the tank we used for the ISAC system when we were installing them in people's trunks/hatches. It would work very well on the firewall.

4q_tanklg.jpg


IIRC there is a boss for a low level sensor too.
 
that container would work perfect how big is it and can i put the fitting from the stock coolant overflow in the bottom of that? razor ill be calling sometime in the future for a longer feed line. yes ac is gone...just about everything is gone no fenderwells etc. its an ls swap with a custom turbo kit thats why i had to move it all. where can i get a container like that one but with nothing in the bottom so i can tap it for my existing fitting form razors kit? thanks guys
 
I have one in my RX7 . Search the net . Lots of Alky guys have them. I am sure Julio or Jay could help ya.
 
any pics grumpy? how much does it hold? any links to containers i looked the web and just cant find whati m looking for
 
that container would work perfect how big is it and can i put the fitting from the stock coolant overflow in the bottom of that? razor ill be calling sometime in the future for a longer feed line. yes ac is gone...just about everything is gone no fenderwells etc. its an ls swap with a custom turbo kit thats why i had to move it all. where can i get a container like that one but with nothing in the bottom so i can tap it for my existing fitting form razors kit? thanks guys

You can call Labonte Motorsports.

The tank comes with nothing in the bottom. You have to drill it and tap it.
 
You can buy the tank separately from AEM for $66.45 , it looks just like the Labonte unit. My son & I installed the AEM water / meth injection on his Cobalt SS turbo in the trunk. Nice sturdy tank works well.:cool:
aemelectronics.com aem part#30-3011 (1 gallon tank) . I wish I knew how to link this but heres the info.
 
Those tanks come in 2qt, 3qt, 4qt, and 5qt.

Height is 6,9,12,15. 6 inches on the 2qt. Size is 4x6 then the height dictates capacity.

Another option is doing a 1 gallon Jazz fuel cell.

The 1 gallon 4x6x12 tank with a vented cap 25.00. You can tap the bottom for a 1/4 NPT thread and use your existing low level. I can pre-drill the low level and tap the hole no problem. Feed hose tank to pump is 7.25 per foot plus 5 for each fitting crimped on.
 

Attachments

  • 1 Gallon Meth Cell.jpg
    1 Gallon Meth Cell.jpg
    56 KB · Views: 206
ok found a tank. hope to have it ordered up soon and sometime in the next month i will be calling you razor for a new feed line. thanks
 
ok i found a tank locally and had some more questions. first being is it ok to take the fitting apart from the old tank and use just parts of it and tap it into the new tank? second what can i use as a sealer on the threads that alky will not eat away and leak? thanks guys
 
ok i found a tank locally and had some more questions. first being is it ok to take the fitting apart from the old tank and use just parts of it and tap it into the new tank? second what can i use as a sealer on the threads that alky will not eat away and leak? thanks guys
You can reuse the elbow on the outlet. It's 1/4 npt thread
Use Teflon paste or tape on pipe thread fittings
 
thanks razoe, once i have it all installed im gonna measure the line out and send you a pm for new feed line from pump
 
Back
Top