You can type here any text you want

map I.D

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

SLICK6

New Member
Joined
May 30, 2004
Messages
16
I've done some checking and this is what I found.Map sensor part # is 16009886 or #213-183.Voltage @ center pin ign on car off is 2.36v what the f---- do I have here?.This is the map sensor that was supplied with the cyberdyne dash # 5202.It is supposed to be a 3 bar .I am beginning to think it isn't.Any thoughts on this?
 
Originally posted by SLICK6
I've done some checking and this is what I found.Map sensor part # is 16009886 or #213-183.Voltage @ center pin ign on car off is 2.36v what the f---- do I have here?.This is the map sensor that was supplied with the cyberdyne dash # 5202.It is supposed to be a 3 bar .I am beginning to think it isn't.Any thoughts on this?

Are you for sure on having the + and - correct?.
If they're correct and you have ~ 2.5v that would be a 2 bar.
 
Three bar sensor reads 1.6. Two bar sensor reads 2.4 approx. That is with 5 volts applied to power, and ground on the ground. No vacuum or pressure present on its port.

If its a 2 bar, it will only read to 15 PSI. Actually 14.7 PSI.
 
Back
Top