Modified Tranny Pan for my 700R4

[Lockman]

I've got an 84' Buick 3.8 Turbo SFI in my CJ5 Jeep !!! I Love It . The problem I got is that the the front Drive shaft Is close to the tranny pan. Does any one know if someone custom makes a 16 Bolt pan, offset on the right side ? I know this sounds weird, but I know there are some Great fabricator's out there. I Just need to connect with a couple ,- 3 !!! Thanks for any ideas or advice.'Lockman

 

[SS/GN]

This is the only pan that I know off and it is deeper than stock. stock pan is not very good at controlling oil and the deep pan is an improvement. Not sure if this would e easier to modify.
https://www.summitracing.com/int/parts/hup-hp3880/overview/
Good luck

 

[1KWIKSIX]

Got my Hughes Deep Aluminum Pan (same as above) from Nick Micale at Arizona GN.

 

[Lockman]

Got my Hughes Deep Aluminum Pan (same as above) from Nick Micale at Arizona GN.

Hey .... everyone . I Just scored a new 'Offset' Tranny Pan ( Please See Pic ) I believe it was designed for my front shaft to 700R4 clearance problem.

( That I bought , OF Course !!! , LoL ) I 'm very pleased. My stock pan measures 3" deep , from flange to bottom. The shallow part of the new pan is just 2" deep X ......3" , going right to left , looking forward . The deep part is 4" & that clesrs the tranny cross brace with 2" to spare . I Love the smell of new aluminum in the Morning ! It's from Transmission Depot in Hudson FL. www.transdepot.net - Daniel is top notch ! ....Thanks for thinking about my Unique problem !
( Lockman)

 

[Lockman]

 

[Lockman]

WELL........... I got my 700R4 deep Pan this morning. The cut away or indent or what ever ya call it, is on the Front, Not the RIGHT side !!!! I'm Busted flat, psych wise, on Lake Ontario ? Oh Well, At least it's going from 25 Below to 50 degrees this weekend..... Go Figure

........on to the next.

Oh BTW, The picture that I posted ( They gave Me ) shows the wrong Design & Dimensions.....
I guess I embarrassed for recommending them , to all my pals here on the Forum ..... ( any othe Ideas would be greatlty appreciated