Nee snout rebuild kit for my 1997 Park Avenue Ultra

[Walt03]

My 1997 SC is passing a little oil from behind the front pulley.
I have 230K miles on the Park Avenue Ultra with no trouble but I would like to rebuild it myself B4 noises begin and need to know where to get the rebuild kit and how to rebuild it.

Any information on the snout rebuild kit and DIY information would be most helpful.
Thanks
WAM

 

[RegalT-type85]

rebuilt as new couplers? if so , just take off the nose, pop out the old couplers, install the new ones . Reinstall nose, fill with SC oil and your done. (if i can recall right)

 

[chuckross1957]

I saw a post that mentioned a place in the Atlanta area that exchanged your snout for one that had a new bearing for ~ $200. From the the few posts I have seen on rebuilding the snout, It sounds like a job that is best suited for a shop that is set up to do it. It might require a press to do it properly.

 

[flyboy367]

ZZPerformance. everything you need is here

 

[murphinator]

I have about a half dozen M90 sc's currently

$100 with stock pulley , $150 with modular pulley sytem

shipping not included

snout only $40