Need a couple of torque specs

[Mike T]

Front pump to case and center support please

Also the band was at .090 on the original build and I've tightened it up to .055 now my question is how might the .090 have affected the 2/3? Wasn't quite a bind or a flair more like a split second hesitation at part throttle.......was fine at full throttle.

 

[Lil Truck]

Pump to case 25 ft lbs, I believe the center support is the same. Not sure about the band clearance causing the shift delay, but I would suspect pressure and/or timing problem.

 

[INEEDAGN]

 

[Lil Truck]

The information I have came from an old ASTG video. I didn't have a chance to review it until this morning. It does say 25 pump to case, the center support is 20. I will probably reduce to 20 on the pump to case as a safety margin.

Thanks for the info Ineedagn!

 

[Mike T]

Thank you guys. Hadn't torqued the pump to case but did hand righted the center support to feel......bet I exceeded the recomened by 10

 

[Hahny]

Here you go!

 

[Royal-T-Ltd]

View attachment 320211Here you go!

He’s building a transmission. [emoji6]


Sent from my iPhone using Tapatalk Pro

 

[Hahny]

He’s building a transmission. [emoji6]


Sent from my iPhone using Tapatalk Pro

Yeah, I just realized that. Good catch Royal-T-Ltd.