Ok, I need a little help understanding this...
I am running a 400"SBC
I was running a bank to Bank setup with MSD distributor.
I am switching to a Sequential box with individual cylinder control.
I installed a Moroso crank trigger and MSD crank trigger distributor.
I set the motor at 50* BTDC and lined up the pickup on the crank trigger.
Set the distributor to point at number 1 locked it in an7d ran my spark plug wires.
Now comes the question, Do I hook it up to the plug labeled CRANK or the one labeled CAM on my Fast harness.
It said to set the crank reference angle at 50* BTDC and set the timing by tweeking this number, not the crank trigger.
Another question... I am having trouble finding an adaptor to plug my new HP Pavilion laptop into the FAST unit, any suggestions there?
Thanks for your help,
Don Barnett
I am running a 400"SBC
I was running a bank to Bank setup with MSD distributor.
I am switching to a Sequential box with individual cylinder control.
I installed a Moroso crank trigger and MSD crank trigger distributor.
I set the motor at 50* BTDC and lined up the pickup on the crank trigger.
Set the distributor to point at number 1 locked it in an7d ran my spark plug wires.
Now comes the question, Do I hook it up to the plug labeled CRANK or the one labeled CAM on my Fast harness.
It said to set the crank reference angle at 50* BTDC and set the timing by tweeking this number, not the crank trigger.
Another question... I am having trouble finding an adaptor to plug my new HP Pavilion laptop into the FAST unit, any suggestions there?
Thanks for your help,
Don Barnett