Need help with modified ecm

[tysongross]

My ecm was modified for peak and hold injectors. Today i noticed the powerlogger was loose so I pushed it back in while the key was turned on... I saw a little smoke come out near the powerlogger board connection to the ecm. Now the car will not start it will fire the immedialy die. Is there anyone that can replace the ecm that has been modified?Im thinking its toast since the smoke came out of it. Thanks

 

[turbo96max]

Bob bailey can probably help you

 

[dank GN]

Yea you have to trap the secret smoke inside jk lol I'm looking for one as well . I emailed Bob Bailey and hopefully he will be modding some soon .

 

[tysongross]

yep has it ☺

 

[TurboBuRick]

SD2 or maf car?

 

[tysongross]

sd2

 

[TurboBuRick]

Check to make sure the analog cable is plugged in the powerlogger and analog block.

 

[TurboBob]

smoke is never good.....

 

[TurboDave]

Check to make sure the analog cable is plugged in the powerlogger and analog block.

Why speculate? He smoked it mucking around in there with the key on.


Sent from my iPhone 6+ using Tapatalk.[emoji252]

 

[TurboBuRick]

Why speculate? He smoked it mucking around in there with the key on.


Sent from my iPhone 6+ using Tapatalk.[emoji252]

Because he said it starts and dies. There has to be something working for that to happen. No?

 

[TurboDave]

Because he said it starts and dies. There has to be something working for that to happen. No?

Depends on what was toasted.

 

[TurboBuRick]

I always try and look beyond the actual question and pick out clues. If the ecm fried I don't see the car starting. More troubleshooting need to be done IMO.

I would connect to the pl with laptop and see what you see.

 

[Street Lethal]

If the ecm fried I don't see the car starting.

Will the SES light still flash when in diagnostic mode if the ECM is bad, or was too much changed in the ECM to not embellish codes and/or malfuntions that way anymore...?

 

[TurboBuRick]

Will the SES light still flash when in diagnostic mode if the ECM is bad, or was too much changed in the ECM to not embellish codes and/or malfuntions that way anymore...?

I doubt it.