Need TA Performance specific VBand clamp

[JDSfastGN]

I’m looking for a TA performance VBand clamp. They are an oddball width and so far nothing ive bought works. If you have a good used one I’d like to buy it. It’s all I have left to fire up my new engine. I’m about to bolt the stockers back on if I can’t find one. Thanks!

 

[BEATAV8]

TA sells replacements

 

[JDSfastGN]

TA sells replacements

Unfortunately they don’t. They had to switch suppliers for VBands and they aren’t the same anymore. They did not have any replacements and asked if I’d share a part number if I found one.

 

[RICHIE HIGH PSI]

Advance auto parts carries them.

 

[turbo nasty]

Richie is it this one? Looks like it

Advance Auto Parts - Down for Maintenance

Dorman - OE Solutions Turbocharger To Exhaust Up-Pipes V-Band Clamp
LIMITED LIFETIME REPLACEMENT
Part # 904-251

 

[RICHIE HIGH PSI]

I'm not sure about the one you pictured...
I use the one pictured below.
It's in stock at my advance auto.
It's also available from orileys, summit, Amazon.

 

[turbo nasty]

I'm not sure about the one you pictured...
I use the one pictured below.
It's in stock at my advance auto.
It's also available from orileys, summit, Amazon.

Cant see a part #

 

[JDSfastGN]

I’m not sure that’s it unless Dormans website is incorrect. It says 100mm which is 4” and it says pipe diameter of 3.5 on their website. I’ve tried a motorcraft EGR VBand for a ford diesel as well but it wasn’t right either. TA sent me a profile drawing of the specs. I’ve tried vibrant, summit brand, the motorcraft lots of people mentioned and a couple other brands.

 

[BuicksBad]

One clamp is that expensive?!?! Someone must have told them to jack up the price for the TR guys.

 

[Chuck Leeper]

https://www.racepartsolutions.com/

Give these guys a call. They are a serious race parts mfgr and supplier.
Really nice people.
Also, there are several people on LS1 tech that mfgr turbo systems. Take a look there.

 

[JDSfastGN]

https://www.racepartsolutions.com/

Give these guys a call. They are a serious race parts mfgr and supplier.
Really nice people.
Also, there are several people on LS1 tech that mfgr turbo systems. Take a look there.

ive got an email in to them with all the specs to see what they say but haven’t heard back yet. Thanks you!

 

[Chuck Leeper]

AIRC, my go to guy there is Wade. Nice guy, and very helpful.
When I say serious, they have CNC benders, lathes, etc, and make many of the parts they sell.

 

[JDSfastGN]

AIRC, my go to guy there is Wade. Nice guy, and very helpful.
When I say serious, they have CNC benders, lathes, etc, and make many of the parts they sell.

Thanks Chuck. I just sent Wade an email with more of my dimensions. Hopefully I hear back sometime this week before I yank them off

 

[Chuck Leeper]

URMW!