I'm going to be re-ringing/honing one of my cylinder that got hungry and ate a piston. I need a set of rings and rod bearings for that cylinder, everything is stock/std. sizes.
I am also going to be putting on new headgaskets and was trying to track a set down. I would prefer the stock hotair style steel shim gaskets (0.017" thickness) to maintain stock dimensions/pushrod length, etc. Though from what I've researched, a set of Fel-Pro 1000's will work too, especially if i get the deck on the head milled 0.010" to account for some of the increased thickness.
If anyone has anything to help I'd appreciate it
I am also going to be putting on new headgaskets and was trying to track a set down. I would prefer the stock hotair style steel shim gaskets (0.017" thickness) to maintain stock dimensions/pushrod length, etc. Though from what I've researched, a set of Fel-Pro 1000's will work too, especially if i get the deck on the head milled 0.010" to account for some of the increased thickness.
If anyone has anything to help I'd appreciate it
