My IT dept. has t6p blocked, so I can't see the thread. Is there a list of proposed rules? If so, can you paste them in this thread?
K.
Here is what has been covered so far:
Very basic over view of the rules below:
3500# for an iron headed 8445 casting head
3650# for an aluminum headed aftermarket head with stock style pattern
(no stage heads)
Block is to be a 109 Buick V6 only
Transmission has to be a 200R4 with any converter allowed
Any air to air intercooler, no liquid or add on cooling allowed
After market fuel management allowed
Factory AC and heat equipment required
Factory stock appearing Type 1 or 2 DIS. Cam position sensor required.
Alchy injection allowed, gasoline must be used as primary fuel source.
Turbo will be limited to a 67mm that is presently being sold to the public.
( no customs one off stuff)
Full exhaust required, must muffle and exit in stock location. Single allowed.
max size of single ordaul 3.5 inches
Stock fuel tank must be in place but a fuel cell can be added.
4 matching wheels required.
Slick up 10.5 sidewall designation, Drag radial up 275/60
This is just a start and many more things will have be looked at but I believe it should give everyone interested an idea of what kinda cars this class is being put together for.