New LM-1 readings

[Turbo86GN]

Hi all, seems to be running a little rich. Just took her out with the new LM-1 and I'v attached the short pull data. This data was from cruising at 30 MPH, floored it and hit 15 lbs boost and at about 80 mph and backed out.

Any tips on the numbers and/or leaning it out.

I've got TE44, 50's, THDP, stock IC, bigger fuel pump, TT chip, etc.

 

[BEATAV8]

Seems to be fueling a bit erratically at a couple points. Note at around 8.52sec it goes from 10.23 to 13.02. Is that at a shift or something?

I reccomend getting a power logger and plugging the LM1 into that so you can link up the A/F data with the engine data.

 

[ijames]

If nothing else get the $10 cable from innovate and wire in the tps 0-5V as an analog input so you can get a "start" signal. I used an rpm converter and wired in map, tps, and rpm so I can align my lm1 traces and ds traces.