You can type here any text you want

OFFICIAL: wheel/tire picture thread... show em off!

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
014.JPG
006.JPG
006.JPG
18x8 RPM wheels 245/45/18 Goodyear F1 Front
18x9 RPM wheels 275/40/18 Goodyear F1 Rear
 
ESM, too bad about the spacers but otherwise looks good. did you buy 5x120 and it slipped on ok?
 
CAR: 87 Turbo-T
Wheel size:
FRONT: 15x7
REAR: 15x8
Back spacing:
FRONT: 4.0 inch
REAR: 4.5 inch​
Tire size:
FRONT: 26x8.0 Mickey Thompsons
REAR: 275-60-15R ET Streets Drag Radials​
[U]Make/Model of tire:[/U] Mickey Thompson front and rear
[U]Make/model of wheel:[/U] Summit racing Fast Five Rims
Brakes: Stock
Aftermarket Spindles: N/A
No rubbing, and no spacers at all. And for $468.40 with lugs shipped to my door i can't complain.:)

IMAG0633.jpg
 
CAR: 86 GN
Wheel size:
FRONT: 17x8
REAR: 17x8
Back spacing:
FRONT: 4.5 inch
REAR: 4.5 inch​
Tire size:
FRONT: 245/45/17
REAR: 255/50/17
Make/Model of tire: Nitto 555's
Make/model of wheel: Boyd Coddington Timeless 5's
Brakes: S10 wheel cyn bigger shoes in the rear. Driiled rotors up front
Aftermarket Spindles: Stock
Will post pics later
 
CAR:

Wheel size:

FRONT:15x6
REAR:15x8

Back spacing:
FRONT:3.5
REAR:4.5 used 5/16 in spacer to clear frame


Tire size:

FRONT:Falken 205/65/15
REAR: Nitto 275/50/15


 
Front: Weld Star RT 15x5 with 2 1/2 backspacing. Tires: Mickey Thompson S/R 26x6-15
Rear: Weld Star RT 15x9 with 4 1/2 backspacing. Tires: Mickey Thompson ET Street Drag Radial 295/55-15
Standard drums on the rear, no notched frame, no rolled fender lips, stock height springs.

IMG_6727m.jpg


IMG_6718m2.jpg
 
toomanymodz said:
Front: Weld Star RT 15x5 with 2 1/2 backspacing. Tires: Mickey Thompson S/R 26x6-15
Rear: Weld Star RT 15x9 with 4 1/2 backspacing. Tires: Mickey Thompson ET Street Drag Radial 295/55-15
Standard drums on the rear, no notched frame, no rolled fender lips, stock height springs.

That is SICK!!! Nice work
 
i have one word for that asz end mr toomanymodz.....level'd:cool: ...fukn drives me nutz looking at the unlevel'd asz end of my car...always trying to level it with the air bags but i know it needs some frame braces.
 
I noticed that you mentioned that you had an LS1 brakes. Did you take them from a Camaro and they drop in??
 
Love the stance of this!! What suspension changes did you have to make?
 
New wheels and tires just installed. 16x8 Torq thrust D. 4" back spacing. BFG gforce sport comp 2, 245/50-16 front 255/50-16 rear.
 

Attachments

  • Torq thrust D.jpg
    Torq thrust D.jpg
    1.2 MB · Views: 886
CAR: 1987 Buick GN

Wheel size:

FRONT: 15" X 6"
REAR: 15" X 7"

Back spacing:
FRONT: 3 3/8"
REAR: 3 3/4"


Tire size:

FRONT: 215 / 65
REAR: 275 / 60

Make/Model of tire: BFG TA in front BFG Drag Radials in rear


Make/model of wheel: American Racing TT2

Brakes: Vacuum brakes - SSBC dual piston callipers up front and 11" Ford drums out back

Aftermarket Spindles: Yes, Bell Tech


Here's my current setup soon to be replaced with Centerline Rev wheels thanks to pictures of Todd Kay's car!!! Same tires but going 15 x 8" in the rear with 4" backspace.

CAR: 1987 Buick GN

Wheel size:

FRONT: 15" X 6"
REAR: 15" X 7"

Back spacing:
FRONT: 3 3/8"
REAR: 3 3/4"


Tire size:

FRONT: 215 / 65
REAR: 275 / 60

Make/Model of tire: BFG TA in front BFG Drag Radials in rear


Make/model of wheel: American Racing TT2

Brakes: Vacuum brakes - SSBC dual piston callipers up front and 11" Ford drums out back

Aftermarket Spindles: Yes, Bell Tech


Here's my current setup soon to be replaced with Centerline Rev wheels thanks to pictures of Todd Kay's car!!! Same tires but going 15 x 8" in the rear with 4" backspace.
Do you have any pics of the centerline revs on your car? thx
 
Back
Top