OFFICIAL: wheel/tire picture thread... show em off!

[dragrazor]

^^^beautiful!!!!


Sent from my iPhone using Tapatalk

 

[MDavis]

View attachment 204355View attachment 204356 here is mine, got them from g-body parts...not sure how much i like them. they are really nice rims. they are the aluminum version. 15x7 on front and 15x10 with 4 1/2 back spacing rear with 275 mickeys. might sell them and buy some weld v-series with 15x9 with 4 inch back spacing and the skinnies up front. lower the car down as well.

When your ready to sell them i'll take them off your hands

 

[87chrisss]

Im about to sell them so might as well post them up,

Billet Staggered 20's

[

 

[GN Andy]

Hi strokerace I recently got the same exact wheels you got and I was wondering if you had to run spacers in the front and back to fit them or was it just prefrence any help would be appreciated.

Sent from my SGH-M919 using TurboBuick Mobile mobile app

 

[Mackinblack007]

Been working on finishing this car. Pretty much done now except brakes.

that is most beautiful we4 ive ever seen.

 

[V6sleeper]

centerline billets
16x 8in fr-235 50 16 firestones
16x 9.5in backs -275 45 16 toyo tq- drag radials

 

[Ci restorations]

What's that wheel and what size wheel and tire combo and what drop? Looks good!

Posted from the TurboBuick.Com mobile app

 

[V6sleeper]

What's that wheel and what size wheel and tire combo and what drop? Looks good!

Posted from the TurboBuick.Com mobile app

if your asking me, the car has ATR springs 1" drop and edelbrock shocks.

 

[Ci restorations]

Sorry never used this app version this was mentioned for Mackinblack007

Posted from the TurboBuick.Com mobile app

 

[luv2whelie]

Cool idea, Scot. What pro touring board(s) are you on?


Here's my info:

CAR: 1986 Buick Grand National

Wheel size:

FRONT: 18" X 8" (+ 1.25" Spacers)
REAR: 18" X 10"

Back spacing:
FRONT: 4.50"
REAR: 4.75"


Tire size:

FRONT: 245 / 40 ZR18
REAR: 285 / 35 ZR18

Make/Model of tire: Nitto NT555


Make/model of wheel: Boze Forged Mesh

Brakes: Stock (For now)

Aftermarket Spindles: Stock (For now)

what was the approximate cost on your Boze wheels?

 

[sattoearth]

18" Binno's. Car needs to be lowered 1" IMO.

 

[jerod]

BFG G-Force KDW
(rear) 295-30-18
(front) 265-30-18

Wheels: 18" TSW Valencia w/ 2" adapters all around. Fenders could be rolled, but I'm trying airbags first. They just barely rub on the outside fender in back on inclines (just need to be careful)

Brakes: Willwood 12" in front and 11" rear.

 

[sattoearth]

BFG G-Force KDW
(rear) 295-30-18
(front) 265-30-18

Wheels: 18" TSW Valencia w/ 2" adapters all around. Fenders could be rolled, but I'm trying airbags first. They just barely rub on the outside fender in back on inclines (just need to be careful)

Brakes: Willwood 12" in front and 11" rear.

 

[sattoearth]

Looks nice Jerod. Did this car have lowering work done to it?

 

[jerod]

Nope, not lowered. I'm not sure I like how they sit when leveled out or lowered. I really just enjoy the stock stance. Lowering this would definitely require fender work in the rear.

 

[dragrazor]

Just installed ccw k57 anodized and shotpeened center. Thanks to john at ccw.

245/40/18 front
275/35/18 rear
18x9 front
18x10 rear
4.75 backspacing all around

Sent from my iPhone using Tapatalk

 

[Mike E]

I can't wait for the front wheels to get here so I can put the car back on the ground and roll it outside.

18x11 Weld RTS rear with 5.7 backspacing. But, the rearend is not stock width (but it's close). Frame is notched and stock wheel wells are stretched about 1".
305/35/18's M/T Drag Radials on the rear

 

[WFO_SS]

BFG G-Force KDW
(rear) 295-30-18
(front) 265-30-18

Wheels: 18" TSW Valencia w/ 2" adapters all around. Fenders could be rolled, but I'm trying airbags first. They just barely rub on the outside fender in back on inclines (just need to be careful)

Brakes: Willwood 12" in front and 11" rear.

frame notch?
lowered?

 

[larry33kc]

I can't wait for the front wheels to get here so I can put the car back on the ground and roll it outside.

18x11 Weld RTS rear with 5.7 backspacing. But, the rearend is not stock width (but it's close). Frame is notched and stock wheel wells are stretched about 1".
305/35/18's M/T Drag Radials on the rear

This is bad azz. Need more pics.

 

[6togo]

Yes more pics and what the clearance like on the frame and well lips?